Pages: [1]
Author Topic: Old Ecu  (Read 842 times)
mourison
Jr. Member
**

Karma: +0/-15
Offline Offline

Posts: 48


« on: April 14, 2018, 07:00:46 AM »

Hi everyone Smiley), is possible to do ignition cut rev limiter on old Ecu ? something like Bosh 2,8 .. or I have to change ECU to newer ? , thanks Smiley)
Logged
IamwhoIam
Hero Member
*****

Karma: +18/-24
Offline Offline

Posts: 587


« Reply #1 on: April 14, 2018, 07:06:20 AM »

what type is it exactly? From what car, what engine etc?
Logged

I have no logs because I have a boost gauge (makes things easier)
mourison
Jr. Member
**

Karma: +0/-15
Offline Offline

Posts: 48


« Reply #2 on: April 14, 2018, 12:13:35 PM »

Bravo HGT 1997 ECU 2.10
Logged
Marty
Hero Member
*****

Karma: +103/-71
Online Online

Posts: 1161


« Reply #3 on: April 14, 2018, 07:15:14 PM »

find the ignition dwell table and set the last row to zero for dwell time. change the axis value to 5-10rpm above the second to last rows value. this will give you a "hard cut" if you change ign timing in that rpm range in the last rows -20* that will add in the bing bang boomers
Logged

mourison
Jr. Member
**

Karma: +0/-15
Offline Offline

Posts: 48


« Reply #4 on: April 15, 2018, 02:57:36 AM »

Really thank u Smiley)

I looked for some definiton file, but i couldnĀ“t find any def files ... :/ . Everything is for newer versions :/
Can u give me some tips where can i find it ? . Thank u again Smiley)
Logged
Marty
Hero Member
*****

Karma: +103/-71
Online Online

Posts: 1161


« Reply #5 on: April 15, 2018, 05:14:28 AM »

Really thank u Smiley)

I looked for some definiton file, but i couldnĀ“t find any def files ... :/ . Everything is for newer versions :/
Can u give me some tips where can i find it ? . Thank u again Smiley)
the only fiat 2.1 damos i have are for a punto. if youre good at comparing you should be able to find it 
Logged

mourison
Jr. Member
**

Karma: +0/-15
Offline Offline

Posts: 48


« Reply #6 on: April 16, 2018, 09:24:21 AM »

It works good Smiley) , thank u very much.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)