Pages: [1]
Author Topic: Running more lean to improve fuel-enconomy on low load  (Read 2738 times)
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« on: May 07, 2018, 03:35:09 AM »

Hey,

petrol engine running of AFR = 1 on low and part load because of catalyst (NOx emissions etc.).

But not looking a any emission values, best for fuel economy, engine could run at AFR = 1,08 .. 1,1, as long as EGT is not too high. In low and part load, I think EGT and other temperatures are not a problem.

How to treak the AIR  to 1,1 instate of 1,0 ?

It is just a chance of KFLBTS-map? IMO not, because KFLBTS is only active tabgm_w, tkatm_w, tikatm_w or twistm_w over there limits.

So, what map I am missing to set AIR = 1,1 in low or part-load ?

Thanks for hints and advice
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #1 on: May 07, 2018, 03:47:04 AM »

https://www.google.co.uk/search?q=nefmoto+lambda+lean&rlz=1C1DIMB_enGB785GB785&oq=nefmoto+lambda+lean&aqs=chrome..69i57.4871j0j1&sourceid=chrome&ie=UTF-8

Covered ALL the time.
Logged
prj
Hero Member
*****

Karma: +915/-428
Offline Offline

Posts: 5840


« Reply #2 on: May 07, 2018, 04:11:53 AM »

Uhm, EGT is highest at the stoichiometry point...
Logged

PM's will not be answered, so don't even try.
Log your car properly.
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #3 on: May 07, 2018, 04:13:44 AM »

Thanks for that link Smiley

Quote
It is a constant in the code, it is simply a value of 1 and not intended to be calibrated

So, to run lean, I need to teak the calculation in SC Sad
That´s not, what I am looking for. I hoped that there is somehting like a targe map, where I can lean up the AFR depending on load, not all time as long as some protections will enricht again..

.. need to rethink my idea  Huh
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)