Pages: [1]
Author Topic: Help with "cmd" or command line for ME7_95040 EEPROM Programmer---Post for Noobs  (Read 5298 times)
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW

Let's say you didn't pay attention in computer, or maybe girls were more important in real life.  Grin At any rate, you have no idea how to use "cmd line" anything on your pc. Some of you may know it very well,... good for you. This post is not for you, its for all the slackers out there. I was not very versed in cmd or command line anything, so instead of asking silly questions I decided it better to learn. I found this VERY HELPFUL!!

 http://www.computerhope.com/issues/chusedos.htm

Just thought I might try to help those at there keyboard scratching there heads. Again, this may not be you, but I know there's some out there!

Thank you ArgDub for an awesome program!
« Last Edit: January 19, 2012, 08:01:45 PM by rob.mwpropane » Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)