Pages: [1]
Author Topic: My first log  (Read 5034 times)
s4man111
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 33


« on: December 19, 2020, 08:29:56 PM »

Can someone take a
Look at this . 2001 s4 b5 stage 3 .  This is my first log using Me7. I’m getting p1129 overly rich code and boost cut down to 5-7 psi until I clear code and then I get normal boost.
Logged
s4man111
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 33


« Reply #1 on: December 19, 2020, 08:34:38 PM »

This was a second gear pull each time
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #2 on: December 19, 2020, 08:43:40 PM »

0 bytes.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #3 on: December 19, 2020, 08:44:11 PM »

forget logs, if you are throwing codes fix your trims first.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
s4man111
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 33


« Reply #4 on: December 19, 2020, 08:53:05 PM »

0 bytes?? I went through a lot of trouble to set this up ,did it not log again Huh?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #5 on: December 19, 2020, 08:58:03 PM »

have the decency to check that they have useful information first, preferably with ecuxplot.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
s4man111
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 33


« Reply #6 on: December 19, 2020, 09:07:54 PM »

have the decency to check that they have useful information first, preferably with ecuxplot.

I don't understand I started up visual
Logger and loaded Ecu file and loaded up config file and hit log! Com port was correct too
Logged
s4man111
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 33


« Reply #7 on: December 20, 2020, 12:45:24 AM »

0 bytes.

OK so I figured out what I did wrong I was using a program called visual Me7 I don't know where the hell that came from but I wasn't using the regular Me seven logger!!!
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #8 on: December 20, 2020, 12:48:36 AM »

visualme7logger is a GUI front end, it requires the command line one as well.

You completely misunderstood everything here.

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.057 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)