Pages: [1]
Author Topic: Pulling Immo2 skc issue  (Read 4545 times)
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« on: April 16, 2018, 04:35:57 PM »

I tried to get skc in immo2 eeprom.

I have 00 at 7B adress and 21 at 7A

If I convert hex de dec from 0021 I got 33. you think my skc are 0033 ?

file in attach. thank
Logged
elektronik13
Full Member
***

Karma: +10/-32
Offline Offline

Posts: 198


« Reply #1 on: April 22, 2018, 08:36:50 PM »

I tried to get skc in immo2 eeprom.

I have 00 at 7B adress and 21 at 7A

If I convert hex de dec from 0021 I got 33. you think my skc are 0033 ?

file in attach. thank
as you think, there is another possibility
You are not looking for an accidentally immo off
Logged
Gallo75
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 12


« Reply #2 on: April 23, 2018, 02:26:11 PM »

post original file
Logged

xdf files happen when mommy and daddy love each other very very much
_nameless
Hero Member
*****

Karma: +320/-445
Online Online

Posts: 2654



« Reply #3 on: April 24, 2018, 08:15:00 AM »

the eeprom is immo offed so regardless of skc or not you wont be able to adapt immo
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« Reply #4 on: May 03, 2018, 03:07:31 PM »

the eeprom is immo offed so regardless of skc or not you wont be able to adapt immo

I know that, I will remake immo on before matching skc.


Logged
jogtx16v
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 139



« Reply #5 on: May 03, 2018, 03:10:53 PM »

Just don't look at immo on or off. I just want to know if the skc I have found is good...

I know how to find in immo3 but not sure about that immo2 skc

thanks
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #6 on: May 05, 2018, 06:09:40 AM »

There is no skc in immo2 epprom
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)