Pages: [1]
Author Topic: deathcode 06A906032R 0004 95040  (Read 1931 times)
bororobbo
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 66


« on: April 04, 2018, 06:15:20 AM »

could some be kind enough to remove the death code from my eeprom please i was foolish and did not back it up before flashing a file and now have a permanent DTC. i will be very thankful if someone could complete this request please.
Logged
HelperD
Full Member
***

Karma: +22/-6
Offline Offline

Posts: 107


« Reply #1 on: April 05, 2018, 10:06:52 AM »

No death code in this file. Does the engine light appear when the key is forward?

Christian
Logged

Here to learn and help as much as I can for as long as I can
bororobbo
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 66


« Reply #2 on: April 05, 2018, 02:25:13 PM »

Thank you for looking for me, all is good now it was a different issue causing my problem. I appreciate you trying to help though.
Logged
nyet
Administrator
Hero Member
*****

Karma: +477/-75
Offline Offline

Posts: 10750


WWW
« Reply #3 on: April 05, 2018, 08:14:26 PM »

Thank you for looking for me, all is good now it was a different issue causing my problem.

Please post the resolution to help others in the future. Thanks!
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
adam-
Hero Member
*****

Karma: +105/-26
Offline Offline

Posts: 1962


« Reply #4 on: April 06, 2018, 12:10:19 AM »

He blew a fuse.
Logged
HelperD
Full Member
***

Karma: +22/-6
Offline Offline

Posts: 107


« Reply #5 on: April 06, 2018, 12:50:20 PM »

Thank you for looking for me, all is good now it was a different issue causing my problem. I appreciate you trying to help though.

No problem, happy it has been resolved.
Logged

Here to learn and help as much as I can for as long as I can
bororobbo
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 66


« Reply #6 on: April 10, 2018, 07:08:46 AM »

Fuse 10 for the ecu blew, sorry for the late reply guys.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)