Pages: [1]
Author Topic: Volvo ME7 512kb maps locations  (Read 778 times)
slklite
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 69


« on: May 22, 2018, 12:02:57 PM »

Hello guys, I have a Volvo C70 2.0 T5 (italian model) from 1998 with an ME7 ECU. (I have DBW and COP) My engine code is B5204T3 : 225 HP I don't know about the turbo, but I do know that I have blue injectors and a turbo with an angled flange.

I'd like to convert it to E85 fuel. I wiuld also like to do a nice stage 1 tune for now, and myabe a stage 2 later (turbo back exhaust and new intercooler)...

For now, I managed to read my ECU in bootmode. I think it's already tuned, buit I'm not sure, since I couldn't find an original file for my car...

I managed to find a few maps, but it would be nice if I could get some help from experienced people.

Here is what I found :

1C9EA : LDRXN
1959A : LAMFA
11A14 : KFMIOP
11BC8 : KFMIRL
0C5EB : KFZW
19667 : KFLBTS

I have trouble defining the axis as well.

I'm still looking for :

 - NMAX
 - KRKTE

and ideally for overrun :

 - CWSAWE
 - KFZWMN
 - KFZWSTTM
 - KFNWEGM
 - KFTVSA

Attached, you'll find my original file + my mappack for now. Please bear with me as it's a work in progress.

All advice is welcome.

Thank you.
Logged
Kacza
Full Member
***

Karma: +13/-4
Offline Offline

Posts: 152


« Reply #1 on: June 04, 2018, 02:09:08 PM »

Your file looks tuned.
Your LAMBDA is bad.
Logged
slklite
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 69


« Reply #2 on: June 06, 2018, 02:15:56 PM »

That's what i thought. Do you know where i can find an original for my car ?
Logged
slklite
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 69


« Reply #3 on: June 14, 2018, 04:14:35 PM »

I think I found KRKTE at 19747

Can someone confirm ?

Does somebody know the right factor ?

I saw 0,001778 and 0,000111. Which one is right for my file ?

Thanks.
Logged
Opti
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 31


« Reply #4 on: August 15, 2018, 12:50:49 PM »

I'm fairly certain that I have KRKTE at the same location in my file (B5254T engine -99). I have the scaling set to 0,001778 but I haven't tried changing KRKTE yet, so can't verify if it's correct. I'm running the brown injectors @ 3.8 bar and my KRKTE stock is 0.0925 after scaling. The layout of our files seems very similar, only LAMFA location is different from the maps you listed.
Logged
slklite
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 69


« Reply #5 on: August 19, 2018, 07:59:14 AM »

Well, thank you for your input.

I'm still looking for an original file for my car Sad
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)