Dev Blog
Forum
Wiki
About
NefMoto
>
Noob Zone
>
Noob Questions
(Moderator:
turboat
) >
my fuel not follow KFLBTS
Pages: [
1
]
« previous
next »
Author
Topic: my fuel not follow KFLBTS (Read 4622 times)
tao13
Sr. Member
Karma: +17/-47
Offline
Posts: 471
my fuel not follow KFLBTS
« on: June 03, 2018, 01:33:03 AM »
Hi all.
I use an BAM file with EGT disabled.
I set my TABGBTS to 400 degree.
This is my LAMFA stock from BAM file and this is my KFLBTS modfied by me.
I have a log too and i saw my fuel follow LAMFA between 4200 rpm even if i have EGT (calculate) bigger than 400 degree.
Any sugestion please!
Logged
tao13
Sr. Member
Karma: +17/-47
Offline
Posts: 471
Re: my fuel not follow KFLBTS
« Reply #1 on: June 03, 2018, 08:23:43 AM »
After i changed tabgbts to 820 degree my fuel follow kflbts.....
The rule is not respected i think because i knew if egt > tabgbts ecu works after kflbts if egt <= tabgbts works after lamfa
Correct or i'm wrong?
Logged
nyet
Administrator
Hero Member
Karma: +608/-168
Offline
Posts: 12270
Re: my fuel not follow KFLBTS
« Reply #2 on: June 03, 2018, 10:37:04 AM »
In general the lowest lambda wins.
In order for BTS to be active (below lambda 1), and thus take over from lamfa, certain conditions have to be met.
What do you mean by "EGT disabled"?
Also, did you modfy the other BTS maps?
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
tao13
Sr. Member
Karma: +17/-47
Offline
Posts: 471
Re: my fuel not follow KFLBTS
« Reply #3 on: June 03, 2018, 11:18:18 AM »
Thanks again NYET for your answer.
I have a k04-023 on my auq engine and i don't have egt on my ecu but i wrote a file from BAM (with egt), and i disabled egt from soft like this
CDATR (0x18196) = 0
CDATS (0x18197) = 0
CATR (0x192CA) = 0
So i think my car works now after egt model calculated.
I modified only LAMFA , KFLBTS and TABGBTS
Logged
nyet
Administrator
Hero Member
Karma: +608/-168
Offline
Posts: 12270
Re: my fuel not follow KFLBTS
« Reply #4 on: June 03, 2018, 11:24:34 AM »
Did you consult the rest of the BTS section of the s4wiki?
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
tao13
Sr. Member
Karma: +17/-47
Offline
Posts: 471
Re: my fuel not follow KFLBTS
« Reply #5 on: June 03, 2018, 11:37:23 AM »
I wrote about bts between knock and other maps but I MUST READ more than 20 times to understand ok
If i read only one or two times all things are ambigous.
Logged
KasperH
Hero Member
Karma: +24/-8
Offline
Posts: 630
Re: my fuel not follow KFLBTS
« Reply #6 on: June 03, 2018, 02:46:08 PM »
Have you configured CWLAMBTS correctly?
Logged
tao13
Sr. Member
Karma: +17/-47
Offline
Posts: 471
Re: my fuel not follow KFLBTS
« Reply #7 on: June 03, 2018, 09:20:16 PM »
CWLAMBTS is 0
Logged
prj
Hero Member
Karma: +1072/-482
Offline
Posts: 6038
Re: my fuel not follow KFLBTS
« Reply #8 on: June 04, 2018, 01:42:50 AM »
I know exactly how to fix it, but I see zero contribution to forum...
Besides, if you look at the BTS module, there's not that many variables. It is simple to compare to a car that has BTS enabled to find what you need to change.
Logged
PM's will not be answered, so don't even try.
Log your car properly
-
WinOLS database
-
Tools/patches
nyet
Administrator
Hero Member
Karma: +608/-168
Offline
Posts: 12270
Re: my fuel not follow KFLBTS
« Reply #9 on: June 04, 2018, 08:53:14 AM »
Quote from: prj on June 04, 2018, 01:42:50 AM
I know exactly how to fix it, but I see zero contribution to forum...
I'm not sure thats really fair, he's clearly a noob :/ It isn't as if he's in a position to contribute anything yet anyway.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 28, 2024, 03:35:46 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...