Pages: [1]
Author Topic: my fuel not follow KFLBTS  (Read 4623 times)
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471


« on: June 03, 2018, 01:33:03 AM »

Hi all.
I use an BAM file with EGT disabled.
I set my TABGBTS to 400 degree.
This is my LAMFA stock from BAM file and this is my KFLBTS modfied by me.
I have a log too and i saw my fuel follow LAMFA between 4200 rpm even if i have EGT (calculate) bigger than 400 degree.

Any sugestion please!

Logged
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471


« Reply #1 on: June 03, 2018, 08:23:43 AM »

After i changed tabgbts to 820 degree my fuel follow kflbts.....
The rule is not respected i think because i knew if egt > tabgbts ecu works after kflbts if egt <= tabgbts works after lamfa
Correct or i'm wrong?

Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #2 on: June 03, 2018, 10:37:04 AM »

In general the lowest lambda wins.

In order for BTS to be active (below lambda 1), and thus take over from lamfa, certain conditions have to be met.

What do you mean by "EGT disabled"?

Also, did you modfy the other BTS maps?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471


« Reply #3 on: June 03, 2018, 11:18:18 AM »

Thanks again NYET for your answer.
I have a k04-023 on my auq engine and i don't have egt on my ecu but i wrote a file from BAM (with egt), and i disabled egt from soft like this
CDATR (0x18196) = 0
CDATS (0x18197) = 0
CATR (0x192CA) = 0
So i think my car works now after egt model calculated.
I modified only LAMFA , KFLBTS and TABGBTS




Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #4 on: June 03, 2018, 11:24:34 AM »

Did you consult the rest of the BTS section of the s4wiki?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471


« Reply #5 on: June 03, 2018, 11:37:23 AM »

I wrote about bts between knock and other maps but I MUST READ more than 20 times to understand ok
If i read only one or two times all things are ambigous.
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630


« Reply #6 on: June 03, 2018, 02:46:08 PM »

Have you configured CWLAMBTS correctly?
Logged
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471


« Reply #7 on: June 03, 2018, 09:20:16 PM »

CWLAMBTS  is 0
Logged
prj
Hero Member
*****

Karma: +1072/-483
Offline Offline

Posts: 6039


« Reply #8 on: June 04, 2018, 01:42:50 AM »

I know exactly how to fix it, but I see zero contribution to forum...
Besides, if you look at the BTS module, there's not that many variables. It is simple to compare to a car that has BTS enabled to find what you need to change.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #9 on: June 04, 2018, 08:53:14 AM »

I know exactly how to fix it, but I see zero contribution to forum...

I'm not sure thats really fair, he's clearly a noob :/ It isn't as if he's in a position to contribute anything yet anyway.

Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)