Pages: [1]
Author Topic: High fuel trims at idle + black smoke  (Read 2080 times)
ibizaCUPRA18t
Full Member
***

Karma: +2/-28
Offline Offline

Posts: 153


« on: July 17, 2018, 03:58:38 PM »

Just did a wideband conversion added cores for wideband and all wiring is now ok - no fault codes related to lambda. Voltage tests ok. But after warmup fuel trims reach 20% and idle is very unstable with black smoke. Tried resetting but same happens after 3 minutes. Tried playing with KRKTE but same results. Lambda reads 1.005 - 1.000 most times and voltage is steady at 1.560v - these values should move a lot more? Bad sensor could it be?

What should I look for in logs other than idle trims, injector times, or something else? Thanks.
Logged
purepower
Newbie
*

Karma: +5/-1
Offline Offline

Posts: 22



« Reply #1 on: July 21, 2018, 03:21:05 AM »

Try to have a look on injection times, MAF reading and Rail pressure.

It seems like injection angles are wrong.

But I can be wrong as well.
Logged

PurePowerPerformance
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 17 queries. (Pretty URLs adds 0s, 0q)