Pages: [1]
Author Topic: 07K907309E/8S0907404A 2018 RS3  (Read 1014 times)
amd is the best
Full Member
***

Karma: +6/-3
Offline Offline

Posts: 230



« on: July 02, 2018, 07:57:49 AM »

Not that I have a way to write this to the car yet, but I am looking to start poking around in the binary to try and begin to learn MED17.1.62 for my RS3.

Does anyone happen to have the stock file for the newest gen RS3 or TTRS? Also, if anyone has an ols, I will pay.

Thanks in advance!
Logged

2000 Audi A4 1.8T
1991 Audi 200 20v - 783awhp
1991 Audi 200 20v Avant - 500awhp
prj
Hero Member
*****

Karma: +269/-15
Online Online

Posts: 3374


« Reply #1 on: July 02, 2018, 08:47:10 AM »

Not gonna happen, not on this forum Smiley
Also, amount of tools is quite limited. You need X17, CMD or New Genius / Kess.
Logged
Marty
Hero Member
*****

Karma: +103/-71
Offline Offline

Posts: 1161


« Reply #2 on: July 02, 2018, 08:51:49 AM »

Not that I have a way to write this to the car yet, but I am looking to start poking around in the binary to try and begin to learn MED17.1.62 for my RS3.

Does anyone happen to have the stock file for the newest gen RS3 or TTRS? Also, if anyone has an ols, I will pay.

Thanks in advance!
i have REAL kess master and you know im local Cool
Logged

amd is the best
Full Member
***

Karma: +6/-3
Offline Offline

Posts: 230



« Reply #3 on: July 02, 2018, 09:19:27 AM »

Not gonna happen, not on this forum Smiley
Also, amount of tools is quite limited. You need X17, CMD or New Genius / Kess.

Can you point me to another forum maybe for the ORI or OLS? I'm a long way from trying to flash it anyway but thank you for letting me know which tools will work.

i have REAL kess master and you know im local Cool

Thanks Marty. I will let you know for sure if I don't just buy one myself. Again, I'm a long way away from even considering writing a file to this car at this point.
Logged

2000 Audi A4 1.8T
1991 Audi 200 20v - 783awhp
1991 Audi 200 20v Avant - 500awhp
gt-innovation
Sr. Member
****

Karma: +29/-11
Offline Offline

Posts: 319


« Reply #4 on: July 02, 2018, 10:07:21 AM »

Not that I have a way to write this to the car yet, but I am looking to start poking around in the binary to try and begin to learn MED17.1.62 for my RS3.

Does anyone happen to have the stock file for the newest gen RS3 or TTRS? Also, if anyone has an ols, I will pay.

Thanks in advance!


Sharing the original is not an issue...I think i have all the ttrs sw versions until now. latest i had was 0006 from a car with 5.000km.

I have built my own map pack for those versions i had to tune however they are not so different - 0003 - 0004 - 0006 are almost identical in the calibration area and have just some maps re-located.

i can send you one version (partially encoded) cmd read.Can`t upload because of the upload limit of the forum

Now if you need a map-pack or a damos for this is another story and an expensive one.
Logged
amd is the best
Full Member
***

Karma: +6/-3
Offline Offline

Posts: 230



« Reply #5 on: July 02, 2018, 10:09:42 AM »


Sharing the original is not an issue...I think i have all the ttrs sw versions until now. latest i had was 0006 from a car with 5.000km.

I have built my own map pack for those versions i had to tune however they are not so different - 0003 - 0004 - 0006 are almost identical in the calibration area and have just some maps re-located.

i can send you one version (partially encoded) cmd read.Can`t upload because of the upload limit of the forum

Now if you need a map-pack or a damos for this is another story and an expensive one.

Mine is 0004. I'd love just the stock file. Hell, it's a start. I'll PM you. Thank you!
Logged

2000 Audi A4 1.8T
1991 Audi 200 20v - 783awhp
1991 Audi 200 20v Avant - 500awhp
prj
Hero Member
*****

Karma: +269/-15
Online Online

Posts: 3374


« Reply #6 on: July 02, 2018, 01:05:58 PM »

Dimsport gives you full file when you do virtual read instead of the encrypted CMD shit.
Logged
gt-innovation
Sr. Member
****

Karma: +29/-11
Offline Offline

Posts: 319


« Reply #7 on: July 04, 2018, 01:18:46 AM »

Dimsport gives you full file when you do virtual read instead of the encrypted CMD shit.

Thats kind of frustrating with cmd but again if he needs only the calibration area this file should be fine for him.
Logged
Khendal
Full Member
***

Karma: +5/-5
Offline Offline

Posts: 165


« Reply #8 on: July 09, 2018, 05:18:16 PM »

I have RS3 ori file if you still need... also damos (this one is not free).  Wink
Logged
gt-innovation
Sr. Member
****

Karma: +29/-11
Offline Offline

Posts: 319


« Reply #9 on: July 10, 2018, 07:34:26 AM »

already emailed ori to him.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 18 queries. (Pretty URLs adds 0s, 0q)