Pages: [1]
Author Topic: Can to PID address  (Read 3537 times)
Fero
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 3


« on: March 09, 2023, 03:26:53 PM »

Hi All

Im trying to create an RPI to monitor readings from my Audi A4 B7 using Torque Pro. I want to add some custom PIDs like Engine Oil Temp and Gear Box Fluid Temp which are not available in Torque Pro. I have tried sniffing the CAN Bus and read some data but was unable to understand or convert them. Does anyone have an idea or can point me in the right direction?
Sorry if I posted in the wrong place.
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #1 on: March 09, 2023, 09:54:37 PM »

Hi All

Im trying to create an RPI to monitor readings from my Audi A4 B7 using Torque Pro. I want to add some custom PIDs like Engine Oil Temp and Gear Box Fluid Temp which are not available in Torque Pro. I have tried sniffing the CAN Bus and read some data but was unable to understand or convert them. Does anyone have an idea or can point me in the right direction?
Sorry if I posted in the wrong place.

MED9 Funktionsrahmen, CAN section got all that you need
Its better to sniff canbus for sure
Logged
Fero
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 3


« Reply #2 on: March 10, 2023, 02:07:35 AM »

MED9 Funktionsrahmen, CAN section got all that you need
Its better to sniff canbus for sure
Thank you for the reply. Ill search there.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.089 seconds with 17 queries. (Pretty URLs adds 0.024s, 0q)