Pages: [1]
Author Topic: KWP2000/TP2.0 module coding  (Read 14813 times)
fastboatster
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 59


« on: July 04, 2018, 04:18:35 PM »

I apologize if this question has been asked and answered before, I wasn't able to find clear instructions on how to do this programmatically, though. I know that many modules return their identification, software version, workshop code and coding info as a response after receiving 1A 9B kwp request. Is there any info on the structure of this response? I was able to clearly see ascii strings with part numbers and software versions and numbers which correspond to coding info obtained by other methods, but I don't know how to decode this response in a general way. Similarly, I'm not exactly sure how to construct write request when trying to update coding info and write it back.
Logged
fastboatster
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 59


« Reply #1 on: July 04, 2018, 07:28:20 PM »

So this is what I got from one of the docs from this forum:

ECU-IDP 9B Content Format
1 … 11VW / Audi-Part number7 Bit-ASCII
12Space (0x20)7 Bit-ASCII
13Configuration Program status and programmability37 Bit-ASCII +MSB
147 Bit-ASCII
15Data status7 Bit ASCII
16

Doesn't seem to talk about coding info or anything like that
« Last Edit: July 04, 2018, 07:30:32 PM by fastboatster » Logged
stephanga
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #2 on: August 25, 2020, 08:48:41 AM »

So this is what I got from one of the docs from this forum:

ECU-IDP 9B Content Format
1 … 11VW / Audi-Part number7 Bit-ASCII
12Space (0x20)7 Bit-ASCII
13Configuration Program status and programmability37 Bit-ASCII +MSB
147 Bit-ASCII
15Data status7 Bit ASCII
16

Doesn't seem to talk about coding info or anything like that

Could you please let me know where to find this document?
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #3 on: August 26, 2020, 03:25:27 AM »

Byte 17 contains the number of coding table and the lenght of coding information
Byte 18 to 20 is coding in hex
Logged
elias
Full Member
***

Karma: +17/-3
Online Online

Posts: 56


« Reply #4 on: January 15, 2023, 05:24:35 PM »

If someone reading this, and still dont know how to figure it out: have a look at the FR of MED9.1 , at page 4338. There is a description of all services.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.555 seconds with 17 queries. (Pretty URLs adds 0s, 0q)