Hi,

Situation:
My car started and then it cut itself 2 seconds later. It's seems to be a symptom caused by the immobilizer disfunction.

Flashback:
My Audi dealer refused to give me the login pin(SKC) of my own car and despite all my administrative papers in order... Otherwise, a simple diagnosis costs half a buttock and the repair of the immobilizer: two arms and the skin of a ball.

Decision:
I decided to "do it yourself" and to learn everything from scratch here, even more so, in English, despit of my so bad english level, because you are the only site voluntarily cooperative and really free!! And I salute that state of spirit.

Action:
I extracted and saved the original bin file from the EEPROM, with me7_95040(thanks ArgDub), on the bench with a VAG KKL 409.1 cable and a 12v ATX power supply.

Now:
I want to "immo off" my bin file and write it on bootmode (holding pin 21 few seconde when ignition on) to the EEPROM after a correct Checksum result.

Upcoming:
before writing the modified bin file, I would need a good soul to change the immo into off and do the checksum of the file attached below for me.

Best regard

Sent from Nancy, France, new world football champions 2018, depending on the outcome of the match on Wednesday, 11 July 2018...

Thanks to you bro!!
problem is i never found the program. Apparently, it was removed from the post dedicated to this exe 

Done :0)

I put here my Bin file in immo off with  checksum correction.