Pages: [1]
Author Topic: Needing advice please!!, Immobilizer  (Read 4306 times)
armycat
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« on: July 11, 2018, 12:14:42 AM »

so here is my situation, I have a 2003 vw jetta vr6 with ecu 022 906 032 cs and I reached out to someone to get a flash tune, I payed roughly $175 usd for the tune, he sent me a mpps cable with the software I assumed he bought for like $15 or something, when I finally got everything I put the tune on the car, but it turns out the guy gave me the wrong file and it bricked my ecu. So I spent upwards of 5 hours on the phone with him trying to get the ecu into bootmode to redo the tune, (keep in mind I had basically no clue what I was doing due to my little knowledge on ecu's and how they work) anyways we couldn't get the ecu to go into bootmode so I sent the ecu out to the guy because he said he had a bench and he could fix it. So it's been like a month and a half of him making excuses and saying hes sending it but I had had enough so I went on ebay and bought the exact same ecu (used from a donor car) and now I am at the point where I am trying to find the best way to get the car running because of the immobilizer it won't start, I am wondering if I should try doing an immo off, but I wanted to reach out to someone who might know a little bit more than me, I know this might be a shot in the dark but it's worth a shot  Grin If you can't help me all I ask is that someone point me in the right direction because I have lost my daily driver and it's just sitting there and I am determined to get it running.

Thanks in advance!!!  Smiley
Logged
armycat
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #1 on: July 11, 2018, 12:18:11 AM »

Also I backed up my original ecu, If I flashed that onto the new one would it fix all of my immobilizer problems? Don't really know how this stuff works forgive me  Wink
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #2 on: July 11, 2018, 12:44:58 AM »

No.

Read 95040 with ME7EEPROM and use 95040tool to read the SKC.  Get SKC from cluster using EEPROM Programmer.  Adapt as normal.
Logged
armycat
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #3 on: July 11, 2018, 01:19:16 PM »

I was going to use the 95040tool but the download link was removed from the forum and i can't find it anywhere Sad
Logged
armycat
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #4 on: July 12, 2018, 05:11:00 PM »

Can someone please send me the 95040tool?
Logged
rogerius
Full Member
***

Karma: +61/-6
Offline Offline

Posts: 114


« Reply #5 on: July 13, 2018, 02:46:10 AM »

Can someone please send me the 95040tool?

check this:
http://nefariousmotorsports.com/forum/index.php?topic=1168.0title=
Logged
Kukunin
Newbie
*

Karma: +1/-2
Offline Offline

Posts: 20


« Reply #6 on: July 15, 2018, 01:00:46 PM »

I couldn't find a link to 95040tool as well. But if you have a dump, I can take a look and calculate the SKC for you
Logged
Kukunin
Newbie
*

Karma: +1/-2
Offline Offline

Posts: 20


« Reply #7 on: July 16, 2018, 07:03:14 AM »

No.

Read 95040 with ME7EEPROM and use 95040tool to read the SKC.  Get SKC from cluster using EEPROM Programmer.  Adapt as normal.

Can you post a link to a 95040tool? I can't find it anywhere
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #8 on: July 16, 2018, 07:09:56 AM »

Depends, you gonna smite me again? Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.047 seconds with 16 queries. (Pretty URLs adds 0s, 0q)