hummel
Full Member
Karma: +1/-1
 Offline
Posts: 62
|
 |
« on: July 16, 2018, 07:26:08 AM »
|
|
|
Hi Guys,
I have a R32 engine where i would like the immo off. But i cannot connect with ArgDub's software, see attached screenshot.
I tried with NefMoto program and got following..
I don't know if the chip is 95040 or not?
I don't know if the memory layout is 512 or 1024, i've looked inside the ECU but couldn't se anything.
Can anyone tell me where to look and what to do ?
Any help would be very nice..
|
|
|
|
|
Logged
|
|
|
|
|
IamwhoIam
|
|
« Reply #1 on: July 16, 2018, 09:23:36 AM »
|
|
|
so you've looked inside the ECU but don't know what memory is in it... sounds promising...
|
|
|
|
|
Logged
|
I have no logs because I have a boost gauge (makes things easier)
|
|
|
hummel
Full Member
Karma: +1/-1
Offline
Posts: 62
|
|
« Reply #2 on: July 16, 2018, 10:02:18 AM »
|
|
|
Yes i know  I searched around in here and google, but couldn't find anything usefull. On the immo eeprom it says 95160. Anything else I should look for? But shouldn't ArcDub's program work anyway? |
|
|
|
|
Logged
|
|
|
|
hummel
Full Member
Karma: +1/-1
Offline
Posts: 62
|
|
« Reply #3 on: July 16, 2018, 10:12:01 AM »
|
|
|
 2048kb memory. Sorry bout that...
|
|
|
|
|
Logged
|
|
|
|
hummel
Full Member
Karma: +1/-1
Offline
Posts: 62
|
|
« Reply #4 on: July 16, 2018, 10:49:36 AM »
|
|
|
Is it normal I can connect with NefMoto ME7 Flasher and not with the cmd software?
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #5 on: July 16, 2018, 10:51:03 AM »
|
|
|
2048kb memory. Sorry bout that... uh what Also, the EEPROM is not the flash. |
|
|
|
|
Logged
|
|
|
|
hummel
Full Member
Karma: +1/-1
Offline
Posts: 62
|
|
« Reply #6 on: July 16, 2018, 11:50:09 AM »
|
|
|
Okay, im really lost here. I Believe that this Me7.1.1 isn't as the 1.8T's. I opened the ECU and looked at the EEPROM (on the bottom side right?) on that one it says 95160. If I use ArcDub's program in cmd and try to connect via bootmode and then choose memorysize 95160 it will tell me the 2048kb. But this has noting to do with the memory size in NefMoto software, right? Then where do I see the right memory size??
could it be that it is not possible to connect to my ECU with Nefmoto ??
|
|
|
|
|
Logged
|
|
|
|
hummel
Full Member
Karma: +1/-1
Offline
Posts: 62
|
|
« Reply #7 on: July 16, 2018, 12:39:10 PM »
|
|
|
I tried to connect via k-line to my Me7.1.1 type 1 ECU to removed the immo, but I could not read the flash via Nefmoto.
Is it possible to read/write to the flash via k-line obd on a Me7.1.1 type 1?
What program should i use? what cable?
Thanks
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #8 on: July 16, 2018, 01:45:43 PM »
|
|
|
Nefmoto flasher flashes the flash not the eeprom.
There is litereally no ME7 eeprom (or flash) that is 2048kb so i have no idea what you think that is
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #9 on: July 16, 2018, 01:48:54 PM »
|
|
|
Please don't start new threads, especially in the wrong forum.
One more time: the nefmoto flasher is for the flash, not the eeprom.
|
|
|
|
|
Logged
|
|
|
|
hummel
Full Member
Karma: +1/-1
Offline
Posts: 62
|
|
« Reply #10 on: July 17, 2018, 07:24:07 AM »
|
|
|
Nyet: Well, in commado prompt it saty the memory layout for the 95160 is 2048kb, thats why I thought that was what you where asking about.
Should i be able to Read the flash with the NefMoto, yes or No ? Because i can't, and thought that was because of Immo, but maybe i'm wrong?
And should I be able to connect with the ArcDub's program via OBD ? Yes or No ? Seems like their is alot of different opinions on this ECU type.
|
|
|
|
|
Logged
|
|
|
|
hummel
Full Member
Karma: +1/-1
Offline
Posts: 62
|
|
« Reply #11 on: July 21, 2018, 11:30:36 PM »
|
|
|
Can anyone point me in the right direction ? I'm a little stuck here  Maybe someone could tell me what tools I need to begin with ? I thought i could use my KKL Cable together with ArcDub's EEPROM program, and the NefMoto for the Flash, but maybe i'm wrong? |
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #12 on: July 22, 2018, 05:06:44 AM »
|
|
|
Probably is not a proper ft232rl cable.
|
|
|
|
|
Logged
|
|
|
|
mushtafa
Full Member
Karma: +3/-4
Offline
Posts: 121
|
|
« Reply #13 on: August 05, 2018, 01:29:44 AM »
|
|
|
Your commands in the first screenshot don't match the examples.
Copy the first example command, just change the port number which your cable is using. This can be found in Device Manager.
|
|
|
|
|
Logged
|
|
|
|
hummel
Full Member
Karma: +1/-1
Offline
Posts: 62
|
|
« Reply #14 on: August 06, 2018, 06:16:27 AM »
|
|
|
Thank you, but that didn't help.
I order a confirmed working KKL cable from Ebay, still wainting for it. It the meantime I'm still trying with the one I have, I'm pretty sure it should work.
One think I have problems with is the D2XX driver, when I plug in the cable Windows automatically installs a prefered driver, when I try to change to the D2XX Windows says It already have installed the best driver.
Could this cause my problem? If, then what can I do about it?
|
|
|
|
|
Logged
|
|
|
|
|
