Pages: [1]
Author Topic: Trying to pair immo in a wideband converted car  (Read 4117 times)
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 189



WWW
« on: July 22, 2018, 06:59:43 AM »

Hi guys. I'm making this post to get directions of what to do, because I'm kinda lost.
The situation is the below:

My car is Audi A3 originaly Me7.5.1 (narrowband, 032S ECU) that I made the wideband conversion 8 months ago.
Now my car runs with 032LP ECU, with 032HP crossflashed map. But since then, the ECU has an immo off eeprom in it. And now I'm trying to fix this, and pair again my ECU to the cluster.
Both my ECU and cluster are Immo III.

I have read my original cluster file, and get the Immo ID and PIN of it (as long my car VIN). Then I wrote an virgin 95040 file (i found here on NEF) to my ECU, and followed the procedure of NEW ECU adaptation on rosstech, but I only get is a "malfunction" message on VCDS.

From now, Im kinda lost of what to do. I dont know if I have to make/edit an 95040 file writing the VIN, immoid and PIN I retrieved from my cluster, or if the solution is the modify the cluster file itself... I assume I'm lost know haha.
Any king of help I will appreciate.

I will leave attached my cluster dump, the virgin 95040 file I tried to use, and the current 95040 file with immo-off I'm using know.
Thanks!!
Logged

Audi A3 8L
1984cc stroker - E100 - ME7 wideband converted - 400whp target
Instagram: @a3stroker
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #1 on: July 22, 2018, 07:09:23 AM »

you cant adapt immo with immo off in eeprom just wont work
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 189



WWW
« Reply #2 on: July 22, 2018, 07:26:23 AM »

you cant adapt immo with immo off in eeprom just wont work

But I didnt do that. I was trying to adapt immo with an virgin 95040 file. Some people claimed sucess doing this (here on nef), but In my case dont.
« Last Edit: July 22, 2018, 07:28:49 AM by andredalmolin » Logged

Audi A3 8L
1984cc stroker - E100 - ME7 wideband converted - 400whp target
Instagram: @a3stroker
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #3 on: August 12, 2018, 03:55:38 AM »

Use a wideband file from a 01 aum or aww that way it's still immo 2 and easy to adapt with your cluster
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 189



WWW
« Reply #4 on: August 12, 2018, 10:59:41 AM »

Use a wideband file from a 01 aum or aww that way it's still immo 2 and easy to adapt with your cluster

I didnt understand your point. My car was already immo 3 (2004 brazilian A3).
Logged

Audi A3 8L
1984cc stroker - E100 - ME7 wideband converted - 400whp target
Instagram: @a3stroker
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #5 on: August 12, 2018, 07:52:19 PM »

I didnt understand your point. My car was already immo 3 (2004 brazilian A3).
in europe and usa wideband started in 01 for the 150/180 and and immo3 started in 02 and so did the wideband for the 225. I figured your car was a 2000 year considering how youre making it a big deal to add the immo. go to the immo eeprom section and find a immo3 eeprom and skc. flash the eep to the ecu and log in and adapt it to your existing skc. its really as easy as that
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
dal
Full Member
***

Karma: +6/-7
Offline Offline

Posts: 189



WWW
« Reply #6 on: August 13, 2018, 05:57:43 AM »

in europe and usa wideband started in 01 for the 150/180 and and immo3 started in 02 and so did the wideband for the 225. I figured your car was a 2000 year considering how youre making it a big deal to add the immo. go to the immo eeprom section and find a immo3 eeprom and skc. flash the eep to the ecu and log in and adapt it to your existing skc. its really as easy as that


Ok... I will try that. Thanks for the help.
Soon I give the results here. Thanks!
Logged

Audi A3 8L
1984cc stroker - E100 - ME7 wideband converted - 400whp target
Instagram: @a3stroker
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)