16487 - Mass Air Flow Sensor (G70): Signal too High

Pages: [1]

« previous next »

Author

Topic: 16487 - Mass Air Flow Sensor (G70): Signal too High (Read 7700 times)

amd is the best

Sr. Member

Karma: +11/-5
Offline

Offline

Posts: 268

	16487 - Mass Air Flow Sensor (G70): Signal too High « on: January 30, 2012, 02:35:36 PM »

I had this code after today. Any idea what would cause this or what to do to fix it? The TC light and ABS lights came on during a pull as well.

RS4 MAF using stock RS4 MAF scaling.

Thanks!
Nick


	Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v

phila_dot

Hero Member

Karma: +171/-11
Offline

Offline

Posts: 1709

	Re: 16487 - Mass Air Flow Sensor (G70): Signal too High « Reply #1 on: January 30, 2012, 03:35:54 PM »

Sounds like KFMLDMX


	Logged

s5fourdoor

Hero Member

Karma: +33/-3
Offline

Offline

Posts: 617

	Re: 16487 - Mass Air Flow Sensor (G70): Signal too High « Reply #2 on: January 30, 2012, 03:47:03 PM »

take the original table and multiply the entire thing by 4. thats what i did at least, i've never had the problem...


	Logged

amd is the best

Sr. Member

Karma: +11/-5
Offline

Offline

Posts: 268

	Re: 16487 - Mass Air Flow Sensor (G70): Signal too High « Reply #3 on: January 30, 2012, 03:57:24 PM »

Thanks guys! I just used the KFMLDMX and KFMLDMN values fromt the RS4 file. I'll do a few runs and see if it took care of this issue.


	Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v

s5fourdoor

Hero Member

Karma: +33/-3
Offline

Offline

Posts: 617

	Re: 16487 - Mass Air Flow Sensor (G70): Signal too High « Reply #4 on: January 30, 2012, 04:05:46 PM »

set your entire KFKHFM table to 1.00 as well like in the RS4 file...


	Logged

amd is the best

Sr. Member

Karma: +11/-5
Offline

Offline

Posts: 268

	Re: 16487 - Mass Air Flow Sensor (G70): Signal too High « Reply #5 on: January 30, 2012, 04:17:19 PM »

Quote from: nehalem on January 30, 2012, 04:05:46 PM

set your entire KFKHFM table to 1.00 as well like in the RS4 file...

Already done Wink


	Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v

tao13

Sr. Member

Karma: +16/-46
Offline

Offline

Posts: 460

	Re: 16487 - Mass Air Flow Sensor (G70): Signal too High « Reply #6 on: January 13, 2019, 10:04:37 AM »

Hi all.
I have the same problem but i saw it is activated only on 4 or 5 gear at highet speed and rpm.
I have the stock MAF from BAm engine and the file is stock from BAM.
I attached my stock KFMLDMX and KFKHFM.
Is it a good option to make HFM all 1 like you said fee post ago or increase KFMLDMX?
I think HFM will modify the partial adaption too, Correct?
And other question , my load is higher than Load axis of HFM, do you think i must increase lastr value of axis too?
Many thanks in advance


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 19, 2024, 03:03:41 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search