Pages: [1]
Author Topic: Galletto "boot mode inactive" error ME7.3.1  (Read 4800 times)
botasky
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: August 09, 2018, 02:21:30 AM »

Hi, I'm trying to read a flash from Alfa Romeo 147 2.0TS me7.3.1 ecu with the Galletto cable, but I got "boot mode inactive" when I start reading, I can read the EEPROM with the me7 EEPROM tool and the same galletto cable, if anyone has experienced this problem or know how to read Alfa Romeo ME7.3.1 flash please help, Thank you.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: August 09, 2018, 09:21:27 AM »

What have you tried to get it into bootmode?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Skybroi
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


« Reply #2 on: March 20, 2019, 02:07:04 PM »

pin 20 to mass for boot mode


Inviato dal mio KT107 utilizzando Tapatalk

Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: March 20, 2019, 02:20:12 PM »

holding it there? how long? while powering up? release before reading?

Be specific.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Skybroi
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 8


« Reply #4 on: March 20, 2019, 09:35:05 PM »

holding it there? how long? while powering up? release before reading?

Be specific.
Holding, power up, read, turn off, Power up holding, write
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #5 on: March 20, 2019, 10:23:28 PM »

You have to release before doing read
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 387



« Reply #6 on: March 21, 2019, 12:57:30 PM »

On me3.1 (use same protocol afaik) you shall keep it grounded.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)