NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > IS it true about LDRXN higher than the last column of the stock KFMIR and KFMIOP
Pages: [1]
« previous next »
Author Topic: IS it true about LDRXN higher than the last column of the stock KFMIR and KFMIOP  (Read 3300 times)
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471
Hi all!
Is it TRUE next affirmation:
"If your LDRXN isn't higher than the last column of the stock KFMIRL, KFMIRL and KFMIOP don't need to be altered"
Many thanks
Logged
nbdiy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 54
No.
Only if kmiop/kmirl are from factory programmed that they fit in those colums
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
Quote from: nbdiy on August 12, 2018, 11:26:39 PM
No.
Only if kmiop/kmirl are from factory programmed that they fit in those colums

I have no idea what this means, but if you never want exceed the highest specified load as calculated by KFMIRL, neither KFMIRL or KFMIOP need to be altered.

LDRXN just caps the output of KFMIRL, so if LDRXN is always lower than the highest KFMIRL, then you'll never need a higher KFMIRL.
« Last Edit: August 12, 2018, 11:41:02 PM by nyet » Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nbdiy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 54
This means there are ori files were kfmiop is so altered that a higher load will automatically result in a higher mi, than requested.

This are not many, but they exist
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
In particular:

Quote
The stock KFMIOP map is at most around 80%, so increasing the last column of KFMIRL is not sufficient, unless you increase the last column of KFMIOP. Done properly, mimax should be safely high enough to never limit torque request, such that it is higher than mrfa from KFPED.

https://s4wiki.com/wiki/Tuning#Tuning_KFMIOP_and_KFMIZUFIL
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 11:30:44 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)