Pages: [1]
Author Topic: Me7 tool help problem reading  (Read 4830 times)
Martin1410
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« on: August 20, 2018, 02:45:42 AM »

I make the boot ok but then everything stop
Sending loader+MonitorCore  Fail  error0x40101
My ecu is a ME3.1 Lancia thesis
Any suggestions what should I do thx
« Last Edit: August 20, 2018, 02:47:37 AM by Martin1410 » Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #1 on: August 20, 2018, 02:54:31 AM »

My ecu is a ME3.1 Lancia thesis

Using ME7 tool on M3?...
Logged
Martin1410
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« Reply #2 on: August 20, 2018, 02:58:39 AM »

I have try and for this a make a question maybe someone try because the ecu is to similar with the me7 and the pin are the same with Abritus i have read the eeprom but like me7.3.1 and for this reason i have try to read
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)