Pages: [1]
Author Topic: Incorporating me7 logging into data logger  (Read 560 times)
Cadensdad14
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 105


« on: September 02, 2018, 12:03:06 PM »

I'm in the process of building a data logger for my car to capture items that I cant get through the gps.  I'm using an Adafruit Arduino with an M0 microcontroller.  I have chips to support logging other variables.  10 Hz gps logging for line selection.  Accelerometer and gyro for G information and yaw pitch and roll.  A radio chip to capture our local start and finish line.  I also have a individually addressable led strip for a linear tach.

Id like to connect it to something that accepts elm327 commands (i have a bluetooth reader I can tear apart).  Is there a place to find the source code for me7 logger so I can program my logger to grab parameters deeper than just the PIDs?
Logged
nyet
Administrator
Hero Member
*****

Karma: +428/-53
Offline Offline

Posts: 9704


WWW
« Reply #1 on: September 02, 2018, 08:42:58 PM »

https://github.com/NefMoto/NefMotoOpenSource
https://github.com/nyetwurk/mmll
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Cadensdad14
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 105


« Reply #2 on: September 03, 2018, 05:28:45 AM »

Thank you very much
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)