Pages: 1 [2]
Author Topic: Audi S4 2005 ME7.1.1  (Read 17793 times)
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #15 on: September 29, 2018, 03:32:32 PM »

Also I hate to be a buzzkill but that motor isn't worth any effort to tune.
he has a checksum issue and is trying to reflash back to stock. not exactly tuning
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
v8boy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #16 on: October 07, 2018, 10:59:03 AM »

he has a checksum issue and is trying to reflash back to stock. not exactly tuning
correct!
mppsv16 does not work on a vmare win xp? im getting a error with the loader
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #17 on: October 11, 2018, 08:32:11 PM »

correct!
mppsv16 does not work on a vmare win xp? im getting a error with the loader
I've never had too much luck with 16. It's unstable , crashes and has failed writes from my experience with it. Version 13 and 18 are your best bet
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109


« Reply #18 on: November 21, 2018, 12:05:48 AM »

From my experience, best for st10 by obd is Kess cable. Mpps v13 can program in bootmode but no do checksums. I not tested galletto.
Logged
v8boy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #19 on: January 20, 2019, 01:31:54 PM »

i've bought a used ECU, identical p/n.
Does the Super Vag K+ Can Diagnosis V4.8 read the login codes?
Logged
Kacza
Full Member
***

Karma: +20/-6
Offline Offline

Posts: 213


« Reply #20 on: January 21, 2019, 03:06:22 AM »

From my experience, best for st10 by obd is Kess cable. Mpps v13 can program in bootmode but no do checksums. I not tested galletto.
Does Kess after OBD correctly calculate checksums for ME7.1 ST10?
Logged
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109


« Reply #21 on: January 21, 2019, 06:01:56 AM »

My Kess calculate correct checksum. Some people says me that, they had problems, bricked ecu. If You use china copy, its some risk.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)