Pages: [1]
Author Topic: Locations 12/22 = 02/01  (Read 3909 times)
Risky
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 107


« on: September 11, 2018, 10:41:04 AM »

Okay so i have gone threw 10 different .bins ... locations 12 and 22 all show 01 , mine on the other hand location 12 shows 02 location 22 shows 01. Ive looked threw the forums I couldn't find anything. Im confused and want to understand why its like this. Im not doing the immo off just cloning but i decided to open to bin to make sure it was a good read. This is the original btw and has never been edited. After the read I popped it back in the car and it works just fine... turned on/off multiple times aswell.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601


« Reply #1 on: September 12, 2018, 05:58:44 AM »

Quote
This is the original btw and has never been edited

Not edited by human.
Why do you have two different part numbers in it and nefmoto did edit the file for you.

Logged
Risky
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 107


« Reply #2 on: September 12, 2018, 07:24:30 AM »

Not edited by human.
Why do you have two different part numbers in it and nefmoto did edit the file for you.



No idea about the different part numbers. I seen that in a couple other bins i compared to my 95040. I understand the nefmoto tags. My question was why is 12 = 02. 22 = 01. Or are you implying nefmoto does that...
Logged
Risky
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 107


« Reply #3 on: September 12, 2018, 07:54:07 AM »

This is one of the bins I compared to with that same part #. Slight difference in location though.

Edit:

Misread it, same location, sorrry
« Last Edit: September 12, 2018, 11:10:26 AM by Risky » Logged
elektronik13
Full Member
***

Karma: +10/-36
Offline Offline

Posts: 204


« Reply #4 on: October 28, 2018, 10:44:53 AM »

Okay so i have gone threw 10 different .bins ... locations 12 and 22 all show 01 , mine on the other hand location 12 shows 02 location 22 shows 01. Ive looked threw the forums I couldn't find anything. Im confused and want to understand why its like this. Im not doing the immo off just cloning but i decided to open to bin to make sure it was a good read. This is the original btw and has never been edited. After the read I popped it back in the car and it works just fine... turned on/off multiple times aswell.
I think that someone signed up nicely
Logged
Risky
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 107


« Reply #5 on: November 06, 2018, 07:13:07 AM »

I understand nefmoto tags it lol...thats not what I was confused about. later on I realized it just means not set.. thanks for the replies though, much appreciated!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0s, 0q)