Pages: [1]
Author Topic: audi a4 b6 3.0 ecu to rs6 4.2  (Read 4259 times)
player
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 128


« on: September 22, 2018, 06:00:05 AM »

hello guys. i flashed an S6 4.2 v8 4d1907558 file to a a6 3.0 v6 ecu 8E0909559H . both me7.1

and now 2 injectors short to ground. how can i filx this? as i look at board , it has 2x 30344 so shoud be fine. what is the problem?

i attach ecu board photo and diagnostic on car.

thanks!
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: September 22, 2018, 06:47:58 AM »

probably just a bad flash. give it another go and let us know what happens.
Logged
player
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 128


« Reply #2 on: September 22, 2018, 09:12:55 AM »

tried other flash andsame. could it be missing components because its a 6 cyl ecu and i have 8 cyl flash?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #3 on: September 22, 2018, 09:51:12 AM »

use the 6cyl flash. should work.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #4 on: September 22, 2018, 03:10:06 PM »

Of course a 6 cyl ECU won't run a 8 cyl engine if you are trying to do that.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
player
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 128


« Reply #5 on: September 22, 2018, 05:40:19 PM »

i get that. but why? only problem i see is firing those 2 injectors. and its not software related.are there missing pieces in the ecu? between 30344 and output pins?
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #6 on: September 22, 2018, 11:46:30 PM »

As i know 3.0v6 is a me with wideband lambda , and thre will be hardware diffrences
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.077 seconds with 16 queries. (Pretty URLs adds 0s, 0q)