Pages: [1]
Author Topic: Wastegate pressure of k03s?  (Read 7956 times)
untilnow
Full Member
***

Karma: +2/-2
Offline Offline

Posts: 75



« on: October 04, 2018, 04:02:42 PM »

Does anyone know what this is meant to be?

I'm at 0.3 bar and feel it's a little low?
Logged
SpsWolf
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 16


« Reply #1 on: October 05, 2018, 04:21:02 AM »

See the wastegate as a shortcut for exhaust (meaning at some point the ECU, via N75, will regulate turbo pressure by “wasting” some exhaust), please read the S4 wiki, it’s mentioned in the turbo part if I remember right. Pressure without any other information doesn’t mean anything, you have a log to share ?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #2 on: October 05, 2018, 07:45:17 AM »

generally around 400mbar.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
untilnow
Full Member
***

Karma: +2/-2
Offline Offline

Posts: 75



« Reply #3 on: October 05, 2018, 09:08:37 AM »

generally around 400mbar.

Thank you  Roll Eyes
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #4 on: October 05, 2018, 10:50:34 AM »

Not my rxperience. One thing is cracking pressure the other manifold pressure. Usually 0.33-0.35 bar with 0dc IME.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
untilnow
Full Member
***

Karma: +2/-2
Offline Offline

Posts: 75



« Reply #5 on: October 05, 2018, 05:05:33 PM »

Okay cheers guys, I have some hardware issues I need to sort out but I can now rule that out.

Fixing small boost leaks and a new DV is in order.  Grin


Here's my 0WGDC log anyway.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #6 on: October 05, 2018, 05:09:58 PM »

I stand corrected, prj has it right, as usual
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)