Pages: 1 [2]
Author Topic: allroad L Box 2.7t Stage 2+ Lean on WOT  (Read 7728 times)
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« Reply #15 on: October 18, 2018, 03:19:20 PM »

Ok please see attached logs, seems to be pulling ok but maybe a bit lean according to 02's, let me know what you think good bad or indifferent.
Trying to plug it into EcuxPlot but maybe its too much info and will have to split it up, will do this tomorrow.

Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #16 on: October 18, 2018, 05:13:59 PM »

Narrow band voltages mean nothing. Get a wideband.

BTW not having any problems with those logs and ECUxPlot.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
streacy
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 105


« Reply #17 on: October 18, 2018, 05:29:05 PM »

I was able to read the logs on Ecuxplot after must have been doing something wrong. I am getting a Wideband, zeitronic zt2. How accurate are the whp and torque figures? Seem a very high.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)