Pages: [1]
Author Topic: Obd r/w lock me7  (Read 4390 times)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« on: October 17, 2018, 12:05:14 AM »

Exist some solution for locking obd reading and writing or only reading?
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601


« Reply #1 on: October 17, 2018, 02:20:42 AM »

correct me if im wrong but changed seed key should work
Or buy a grautec board
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #2 on: October 17, 2018, 03:26:39 AM »

somene tried changing seed key?
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #3 on: October 17, 2018, 03:41:54 AM »

correct me if im wrong but changed seed key should work
Or buy a grautec board

grautec for psop44 will not stop reading, only writing.
grautec for plcc44 will block reading though, programmer will dump garbage data.
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #4 on: October 17, 2018, 04:56:10 AM »

grautec for psop44 will not stop reading, only writing.
grautec for plcc44 will block reading though, programmer will dump garbage data.

So without grautec impossible?
Logged
prj
Hero Member
*****

Karma: +1072/-485
Offline Offline

Posts: 6040


« Reply #5 on: October 17, 2018, 05:05:06 AM »

Only bootmode write is impossible to prevent.
OBD is never impossible, simply set requestDownload, requestUpload, readMemoryByAddress and dynamicallyDefineLocalIdentifier to not supported. The latter will kill ME7Logger too tho.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #6 on: October 18, 2018, 01:42:24 AM »

And who can make it?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)