Pages: [1]
Author Topic: Adjust TEMIN and FGATO with Turbocharger on 1.8 20v  (Read 1728 times)
Gulfstream
Full Member
***

Karma: +0/-3
Offline Offline

Posts: 193



« on: October 18, 2018, 08:35:02 PM »

Hi!!

TENIN on my file is 006F1A, anybody can help me to found TENINVA?

My original fuel injectors are 190cc, but now i use a 550cc.

In the past, when the engine is aspirare, i reduce 45% on FGATO to equalize the mixture (0.87v final result). Its ok.

But now i put a turbocharger, to found the ideal mixture in WOT with 0.7bar, i have to increase the FGATO. (i will change for 0.92v with turbo). Its ok.

But now, for equalize the idle mixture and low pedal charges, is just adjust the TEMIN? Or have to adjust the TVUB too?
Logged
ulek3pl
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 48


« Reply #1 on: March 26, 2019, 05:23:17 AM »

Fgat0 for injector scale, kflf for fuel at wot.
Logged
cessnas
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 36



« Reply #2 on: March 26, 2019, 05:44:45 AM »

Should not have to change TEMIN, TEMINVA on the Bosch 550cc.
Adjust KRKTE and TVUB and idle should be good.
Logged
Blazius
Hero Member
*****

Karma: +25/-20
Offline Offline

Posts: 613



« Reply #3 on: March 26, 2019, 05:41:44 PM »

Fgat0 for injector scale, kflf for fuel at wot.


TVUB and krkte, and temin etc if u have issues after that . KLFL is for part load, you can use lamfa though, since N/A doesnt have BTS.
Logged
ulek3pl
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 48


« Reply #4 on: March 27, 2019, 02:45:18 PM »

there is no lamfa and krkte.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0s, 0q)