Pages: [1]
Author Topic: mlhfmm_w to gs calculation... i want to be sure  (Read 2178 times)
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109


« on: October 30, 2018, 06:54:37 AM »

Hi,

I have VR6 car, tuned by me... anyway a lot of things is scaled and i modified st10 flash to get real readings of MAF before scaling data to diagnostic block. I found variable before MLOFS offset value substraction....

On WOT at 6800 rpm i have 18000 number in VCDS... after calculation like.. 18000 * 0.1 - MLOFS ( 200 ) i get 1600 value. If i am on good way, when i divide by 3.6 i should get 444 value of g/s.

Why asking about it... i want to calculate theoretical power using maf sensor... 444g/s should by around 555hp. Good thinking?

What is the maximum value of original MAF? Why in MLHFM i have values from 140 to 1464 only?
Logged
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109


« Reply #1 on: October 30, 2018, 11:52:18 PM »

I have confused the data.... I get maximum 14464 * 0.1 -> 1446.4 -> ~433hp. MAF max value in MLHFM is very close my measured value. I heared that VR6 MAF is good for 500hp...my MAF is too smal for 500hp?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)