Not Hitting Requested Load/Boost 2.7 K04

Pages: 1 [2]

« previous next »

Author

Topic: Not Hitting Requested Load/Boost 2.7 K04 (Read 7678 times)

nyet

Administrator
Hero Member

Karma: +604/-166
Offline

Offline

Posts: 12233

	Re: Not Hitting Requested Load/Boost 2.7 K04 « Reply #15 on: December 20, 2018, 01:28:54 PM »

Try closer to 10-13psi


	Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.

eakinsj

Newbie

Karma: +1/-0
Offline

Offline

Posts: 17

	Re: Not Hitting Requested Load/Boost 2.7 K04 « Reply #16 on: December 20, 2018, 08:11:10 PM »

So, I tightened the wastegates as far as they would go and they were opening at 10-12 psi. I'm debating on getting adjustable wastegates. Made a huge difference tightening the wastegates but i feel like the springs are just to weak in these turbos. I have attached a log from after the wastegate adjustment. I would like to know if the results i'm getting are normal or if i could achieve peak boost at a lower rpm. https://ufile.io/31w85


	Logged

nyet

Administrator
Hero Member

Karma: +604/-166
Offline

Offline

Posts: 12233

	Re: Not Hitting Requested Load/Boost 2.7 K04 « Reply #17 on: December 20, 2018, 08:28:39 PM »

Impossible to tell from that log. You're going to have to increase IMX significantly, or possibly do another (careful) run with the wg line disconnected.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

April 18, 2024, 11:12:16 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search