Pages: [1]
Author Topic: M3.8.3 Flash chip (29F200) read service??  (Read 315 times)
airhaddock
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« on: November 07, 2018, 03:22:05 PM »

Hello,

I just wondered whether anyone offers a flash chip read service for M3.8.3 ECU (29F200).  I have an ECU which the previous owner of my car had mapped and I'd like to use it as a starting point.  I don't have the solderings skills or a chip programmer to do it myself!:( 
Logged
Marty
Hero Member
*****

Karma: +105/-73
Offline Offline

Posts: 1191


« Reply #1 on: November 07, 2018, 04:30:32 PM »

You can read out with minimon I do believe? Somone may chime In that knows for sure
Logged

aef
Hero Member
*****

Karma: +40/-14
Offline Offline

Posts: 1048


« Reply #2 on: November 08, 2018, 03:12:44 AM »

Wouldnt waste my time on this.
There are other tunes around as starting point and you should start from stock file anyway.

If there's a tune, it doesnt mean it's a good one.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)