Hi friends.
Today after reversing the PCB, its time to make CPU dump. Ive dumped the C167CR with minimon. Can someone take a look on it and tell if the data are valid? Dumped from 0-7FFF;

Hi,
firstly happy New year to all Nefmoto readers. Yes i will definitively write an guide, but for now im running out of time. This was the first attempt to read it out.
I have plenty of these Ecus here from the types 0261 205 004, 0261 205 005 and 0261 205 006. I am reversing the PCBs layer by layer (yes i grind it down to internal layers) and they seems to have only minor differences, one thing i noted, that some of them - 004 and 005 are using the C167 with internal ROM as stated on the package marking, but 006 is stated that is an C167 romless, but i didnt yeat read it as i was last 3 weeks laying sick :-(.
My guess it that the marking is just an camouflage and i also read out some ROM.
Q.: Btw, is there an abitiy to inject code to RAM and run if from specific location in MINIMON, or breakpoint the current loaded code ie running the ecu and halt on breakpoint?