Pages: [1]
Author Topic: Throttle cut during WOT  (Read 5284 times)
cessnas
Full Member
***

Karma: +2/-17
Offline Offline

Posts: 77



« on: December 09, 2018, 12:59:35 PM »

Hey!
Got an 2002 Audi A4 1.8T with an ME7.5 ECU.
I've got it tuned by some guy over Facebook who really seems to know his stuff with the ME7 ECU's.
But we're having this weird problem, if i do a WOT run in 2nd gear it boosts up to 20PSI (ish) then drops down again to 15PSI as the revs increase.
The N75 DC is set as 95% fixed because i want to run as much boost as possible with my turbo (GTX28).
If i datalog the usual parameters i can see that at 4500RPM the ThrottlePlateAngel and the ThrottlePlateAngel Requesed drops from 100% to only 32% while the AccelPedalPosition is still at 100%!

Also i've got a intermittent starting problem when the car is semi-cold (couple of hours after its been driven). Where it dosent fire at all. If i reflash the ECU it fires straight up! 

Any ideas?

Here's all the files i've got.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: December 09, 2018, 04:56:00 PM »

Any links to the guy?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1458


mk4 1.8T AUM


« Reply #2 on: December 09, 2018, 05:31:09 PM »

because of actual pressure more than specified+DLUL for example
maf not scaled btw
tans -36 ?

Logged
cessnas
Full Member
***

Karma: +2/-17
Offline Offline

Posts: 77



« Reply #3 on: December 10, 2018, 04:18:54 AM »

Don't have any link to him on here sorry.

The MAF should be scaled to 3 inch.
IAT was broken when I did the datalog. Replaced it but still not boosting properly.
I can post the. Bin file with the Kp. If you could take a look at it?
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #4 on: December 10, 2018, 04:21:27 PM »

Don't have any link to him on here sorry.

The MAF should be scaled to 3 inch.
IAT was broken when I did the datalog. Replaced it but still not boosting properly.
I can post the. Bin file with the Kp. If you could take a look at it?

A link to his FB page would be fine. Post the files, we'll take a look.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12271


WWW
« Reply #5 on: December 12, 2018, 10:23:29 PM »


The N75 DC is set as 95% fixed because i want to run as much boost as possible with my turbo (GTX28).


Find a new tuner.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #6 on: December 13, 2018, 11:10:39 AM »

Find a new tuner.

Love to find out who he is.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
cessnas
Full Member
***

Karma: +2/-17
Offline Offline

Posts: 77



« Reply #7 on: December 13, 2018, 10:46:12 PM »

Turned out to be Boost By Gear that was the issue. The only reason he set DC to 95 was because I asked him to. Since the previous files didn't go as planned he didn't want to do fixed DC anymore.
I'm not sure if he wants me to post his name here..
At least I think he's an great guy that has put many hours into my file, so it's his first A4 so I don't blame him
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556


« Reply #8 on: December 14, 2018, 12:39:50 AM »

Boost by gear on Me7.5?
I would like to learn that Smiley
Logged
cessnas
Full Member
***

Karma: +2/-17
Offline Offline

Posts: 77



« Reply #9 on: December 14, 2018, 01:01:49 AM »

There is a couple of previous posts on here that mentions Boost by gear. He says that the only enginecode with it is the APX, but apparently my A4 also has it.
Here's the post:

https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fnefariousmotorsports%2Ecom%2Fforum%2Findex%2Ephp%3Ftopic%3D2897%2E0&share_tid=2897&share_fid=64425&share_type=t

Sent fra min CLT-L29 via Tapatalk

Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #10 on: December 14, 2018, 03:50:10 AM »

70% cut in second.  OP doesn't want to do pulls in 3rd due to speed limits, etc.

Now have request I'm asking for and all is well.  AIT is fixed too.  MAF is scaled.
Logged
prj
Hero Member
*****

Karma: +1072/-486
Offline Offline

Posts: 6045


« Reply #11 on: December 14, 2018, 07:03:01 AM »

Boost by gear on Me7.5?
I would like to learn that Smiley

KFMDBGRG, MDBGRGA

You're welcome.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0s, 0q)