Pages: [1]
Author Topic: A little problem with understand me7.5fueling ! Help plz!  (Read 2537 times)
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« on: December 13, 2018, 12:43:42 AM »

Hy ,i have a little problem to understand me7.5 fueling ! My car,1.8t (stage2) have an actual afr 12.8 from~ 2000 to 5000 rpm at wot! I stsrted to learn how to tune it !but i have a little problem ! I dont understand how the actual afr is 12.8 becous i sow from the lamfa and bts something else ,i will attach a photo with lamfa and kflbts and i wish someone will make me understand this ! Thank you very much !
Logged
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97


« Reply #1 on: December 13, 2018, 02:53:31 AM »

The maps you are working show the lambda factor, to convert to AFR you need to multiply by 14.7
Logged
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« Reply #2 on: December 13, 2018, 03:50:45 AM »

Yes ,yes , but i dont understand this “shit ! At wot ,ecuu need to follow last column or axis from lamfa or kflbts,that means load axis/culumn or torque comanded by pedal ! In my case ,at 3000 rpm wot , lamfa is 1.0 that means 14.7afr and in kflbts lambda is 0.33 that means 4.85 afr! And my actual adr is 12.8 ,readed from wideband o2senzor ! I dont understand why and where is the diference ! Please help me wit the answare or a way to find the answare ! Thank you very much !
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #3 on: December 13, 2018, 04:41:17 AM »

Map pack doesnt match to your file
Logged
RSC
Full Member
***

Karma: +0/-24
Offline Offline

Posts: 73


« Reply #4 on: December 13, 2018, 05:33:17 AM »

Can you help me with a mapppack or map adress for 06a90632de 1.8t ary and i wait for more ideas !
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 17 queries. (Pretty URLs adds 0s, 0q)