Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Flashing and Chipping
>
Read issue-Factory ECU
Pages: [
1
]
« previous
next »
Author
Topic: Read issue-Factory ECU (Read 3128 times)
nxm08240
Newbie
Karma: +0/-0
Offline
Posts: 5
Read issue-Factory ECU
« on: December 14, 2018, 01:51:11 PM »
I'm trying to read an ME7.5 ECU in a 1.8t. I can connect and read the ECU info just fine. When I go to pull the file off of it, I'm getting a memory validation error. I've verified that it's the stock tune by running the car on the dyno. Any input would be appreciated. Thanks!
Security access granted.
Validating flash memory starts at 0x00800000 and ends at 0x00900000.
Validation failed, ECU reports RequestUpload was rejected. RequestUpload may have been disabled by aftermarket engine software.
Memory layout validation failed.
Starting to read data block.
Requesting upload from ECU for address range 0x00800000 to 0x00803FFF.
Request upload from ECU failed, ECU reports RequestUpload was rejected. RequestUpload may have been disabled by aftermarket engine software.
Reading ECU flash memory failed. Trying to force ECU to recognize read operation is complete.
Finished forcing ECU to recognize that failed read operation is complete.
Logged
nyet
Administrator
Hero Member
Karma: +604/-166
Offline
Posts: 12233
Re: Read issue-Factory ECU
« Reply #1 on: December 14, 2018, 01:55:23 PM »
Quote from: nxm08240 on December 14, 2018, 01:51:11 PM
I've verified that it's the stock tune by running the car on the dyno.
That means nothing, considering many aftermarket tunes have stock mode.
Boot mode. Bet you $100 it isn't stock.
Logged
ME7.1 tuning guide
(READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nxm08240
Newbie
Karma: +0/-0
Offline
Posts: 5
Re: Read issue-Factory ECU
« Reply #2 on: December 14, 2018, 02:04:07 PM »
Good to know. I'm coming over from the world of Subaru's so I'm spoiled with Cobb software... Haha. Am I able to flash a file over this one that is on here? Or does the ECU need to be bench flashed back once, then I can flash via OBD?
Logged
nyet
Administrator
Hero Member
Karma: +604/-166
Offline
Posts: 12233
Re: Read issue-Factory ECU
« Reply #3 on: December 14, 2018, 02:56:08 PM »
Depends if the ecu has a riser for the flash.
If it doesn't, you can flash over it in bootmode with a stock file.
You'll have to open the ECU case to make sure.
Logged
ME7.1 tuning guide
(READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x
Please do not ask me for tunes. I'm here to help people make their own.
Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nxm08240
Newbie
Karma: +0/-0
Offline
Posts: 5
Re: Read issue-Factory ECU
« Reply #4 on: December 14, 2018, 04:32:25 PM »
Ok, looks straight forward. Just to clarify, if it has the riser, I should be able to flash a stock file over the current one through the nefmoto flasher?
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
April 16, 2024, 07:42:23 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
