Pages: [1]
Author Topic: octavia 1 , 1.8T 032HJ  (Read 4559 times)
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« on: December 18, 2018, 02:55:32 AM »

Hello Smiley

Please, can someone look at my soft and log ? What is wrong at hight RPG... (these jumps) ? ... I think i need some correction map for load and specific boost .. :/ or what are u thinking ?
..

Turbo k03 billet , IC, etc ...
And sorry... my english isnt good Cheesy
Logged
Dave9n3
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 284


« Reply #1 on: December 18, 2018, 04:00:47 AM »

First tip - start using me7logger to make logs. Can log many more variables with it unlike vcds.

Can't see actual lambda from the logs, but can see that the boost is oscillating at high rpm so maybe you're running lean but without more variables logged it's hard to tell.

Set up me7logger and run some logs, it'll help.
Logged
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« Reply #2 on: December 18, 2018, 04:42:04 AM »

Okey i will try thanks u.
During today i post log Smiley

and ehm VCDS says something like maf signal is so big. in log u can see curves.
Logged
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« Reply #3 on: December 19, 2018, 02:09:19 AM »

is there some map for fuel ? .. i am using Specific oad and lambda .. :/

Oh and lambda is 0,9 at hight rpm . Is it good or bad ?
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #4 on: December 19, 2018, 04:38:22 AM »

is there some map for fuel ? .. i am using Specific oad and lambda .. :/

Oh and lambda is 0,9 at hight rpm . Is it good or bad ?

0.9v is very rich for both narrowband or wideband.
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #5 on: December 19, 2018, 05:13:04 AM »

0.9v is very rich for both narrowband or wideband.
0.9 lambda is not that rich at all for full throttle 13.23:1 afr. youd actually want to get yourself to around 0.84-0.86 lambda at full throttle. you can add fueling may ways. based off load, throttle percentage vs rpm or calculated egt fueling
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #6 on: December 19, 2018, 05:43:39 AM »

0.9 lambda is not that rich at all for full throttle 13.23:1 afr. youd actually want to get yourself to around 0.84-0.86 lambda at full throttle. you can add fueling may ways. based off load, throttle percentage vs rpm or calculated egt fueling

I wrote voltage not lambda, which would be 0.6x~ lambda , or rich on NB. But yes its irrelevant as he wrote lambda not voltage
Logged
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« Reply #7 on: December 19, 2018, 09:27:10 AM »

Can u look at my log please ? :/
problem is .. at hight rpms it doing "jumps" and which name of maps u mean please ? .Thanks for answer.

Logged
mourison
Full Member
***

Karma: +0/-30
Offline Offline

Posts: 91


« Reply #8 on: December 19, 2018, 11:24:14 AM »

ehm please. what maps i need more to add more fuel ? thanks u
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #9 on: December 19, 2018, 08:22:49 PM »

That's not a ME7L log
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #10 on: December 20, 2018, 02:12:33 AM »

0.9v is very rich for both narrowband or wideband.

0.9 volt on a narrowband could be 10 afr , could also be 13 depending
0.9 volt on wideband is not rich at all........
Logged

VAG cars newbie tuner Smiley
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277



« Reply #11 on: December 20, 2018, 03:37:36 AM »

0.9 volt on a narrowband could be 10 afr , could also be 13 depending
0.9 volt on wideband is not rich at all........

Yes , narrowband is just rich , you dont know exact for sure. 0.9 volt on wideband is rich af. its around 0.68-0.7 lambda on most devices (plx, aem etc.) which around 10-10.5 afr.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.06 seconds with 16 queries. (Pretty URLs adds 0.003s, 0q)