Pages: [1]
Author Topic: 1.8t agu m3.8.3 vr6 maf g/s to hp calc  (Read 2420 times)
ulek3pl
Full Member
***

Karma: +8/-6
Offline Offline

Posts: 81


« on: December 25, 2018, 10:16:38 AM »

Hello! In my 1.8t agu i installed full vr6 maf and i copied mlhfm map from vr6 file. Idle and crusing is very fine. How  i can calc flow in g/s to power?  i have 220 g/s near 6500 rpm but i dont think is 275 hp with 22 ignition advance? Any tips?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: December 25, 2018, 11:24:38 AM »

That conversion is rarely even remotely accurate.

Get to a dyno
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ulek3pl
Full Member
***

Karma: +8/-6
Offline Offline

Posts: 81


« Reply #2 on: December 25, 2018, 12:26:07 PM »

That conversion is rarely even remotely accurate.

Get to a dyno
How plus minus boost and ignition advance i need to get  270 hp on  6-6,5k rpm on hiflow manifold (k03 hybrid)
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 2.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)