EPC after tuning

Pages: [1]

« previous next »

Author

Topic: EPC after tuning (Read 2394 times)

svein

Newbie

Karma: +0/-1
Offline

Offline

Posts: 3

	EPC after tuning « on: December 29, 2018, 06:00:16 AM »

Hi.
I had a guy to tune and immo off on a 2000 Audi A6 C5 1,8t apu engine. He programmed a used box from Ebay with same part#4B0906018AA.
Car starts and run so that's not a problem, but have EPC light on and code from cluster 01177 no contact with ecu.
The guy that tuned say maybe problem with the ECM it self, I tested that in the car before sending it out and no EPC light or no contact ecu from cluster.
Any ideeas?

Thanks and happy new year.
Svein


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: EPC after tuning « Reply #1 on: December 29, 2018, 11:36:21 AM »

pull it with bootmode (or nef if it isn't protected) flash back to stock.

if you still have the EPC its the ecu. If not, your tuner screwed something up.

Also verify the engine coding is correct for your car.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

svein

Newbie

Karma: +0/-1
Offline

Offline

Posts: 3

	Re: EPC after tuning « Reply #2 on: December 30, 2018, 02:48:25 PM »

Hi again.
I have tested the ecu before tuning and immo off.
No problem with EPC.
Had one on another forum tell me to check abs modul??

Thanks


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

December 02, 2024, 03:34:45 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search