Pages: [1] 2
Author Topic: help bosch 06A90618R  (Read 14890 times)
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« on: February 18, 2012, 09:02:22 AM »

hi guys how are you? aver my question is that the ecu 06A906018R read and I found the problem that I detected no winools map in the resulting binary check reading with monoscan!
 thank you very much if someone throws an aver pokito light on this issue ...

 here you have the file for you to take a look
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503


« Reply #1 on: February 18, 2012, 05:31:18 PM »

This is the EEPROM of the ECU, there are no maps to tune in there.
Logged
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #2 on: February 19, 2012, 09:35:20 AM »

and in the EEPROM are not the maps? then where are they? please a little help I've also read the eprom and ram the attachment here you also for you to take a look!
 thanks for answering
 a greeting
Logged
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #3 on: February 19, 2012, 09:36:40 AM »

hi guys here you have the RAM
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #4 on: February 19, 2012, 10:48:03 AM »

all maps in the psop 44 29f200 :-)
Logged
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #5 on: February 19, 2012, 11:01:31 AM »

all maps in the psop 44 29f200?

if you 29f200ab in the eprom but then the file that I have read is not valid? aver as you read you memory stick out? thanks aver if someone helps me
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #6 on: February 19, 2012, 11:07:59 AM »

in the eeprom is the immo no maps for tun :-) in the Flash memory all maps you need :-) .Make a picture from open ecu .
Logged
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #7 on: February 19, 2012, 11:12:33 AM »

 in the Flash memory all maps you need :-) .Make a picture from open ecu ?

I do not understand and then as you read the flash? I have read with monoscan
 thanks for answering so fast
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #8 on: February 19, 2012, 11:20:31 AM »

Desolder the flash . read out with Batronix or galepp, Change maps make chk and write back to flash and solder :-)

i hope your ecu is a test ecu
Logged
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #9 on: February 19, 2012, 11:29:31 AM »

then you can not have spoken acer obd have read in some forums that you can not read, but if you write a small modification mpps 12v operation must be in writing, ecu pin 43, or 13 obd you know something about this?
 I talked to a chipturner my friend told me that we must bring the ECU ace but not ace lack desoladar memory!
 you know some of this
 again thank you very much
Logged
icezero
Full Member
***

Karma: +7/-0
Offline Offline

Posts: 129


« Reply #10 on: February 19, 2012, 11:35:23 AM »

sorry i have no mpps . Only cmd and Byteshooter .
Logged
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #11 on: February 19, 2012, 11:50:56 AM »

I have a mpps the problem is that not only writes ECU reads this with a small modification! as I 5.9.2
 you know of any program type vag, vagme7.5

 then your opinion is to unsolder put a socket and replace 29f200ab

 thanks a warm greeting
Logged
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #12 on: February 20, 2012, 01:32:42 PM »

hi guys thank you very much indeed for the file aora winools am with, I will use the file provided for you to modify maps and upload them to my ecu with mpps v12, bequeath my franken turbo soon
 I have a win!
 you ire reporting

 thanks for all
 a greeting
Logged
joseju
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #13 on: March 05, 2012, 01:34:10 PM »

hello good afternoon guys, I have some trouble identifying some aver map if anyone can help me!
 here you have the maps that I detected winols ..
 I do not identify such forward on the map and fuel mixture
 I have several file descriptors identifiers but these did not appear help please

 thanks a warm greeting
Logged
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350


« Reply #14 on: March 12, 2012, 08:06:16 PM »

Hello,

With what software is this .odt file made/viewable ?

Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 16 queries. (Pretty URLs adds 0s, 0q)