NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Hello everyone! 2001 Audi A4/B5 1.8t AWM here.
Pages: [1]
« previous next »
Author Topic: Hello everyone! 2001 Audi A4/B5 1.8t AWM here.  (Read 3150 times)
Hindra
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« on: January 15, 2019, 11:28:47 PM »
Hey guys, just got my car a few days ago. I own a 2001 Audi A4/B5 1.8t AWM manual trans. I understand I'll need a cable, the nefmoto and TunerPro software to get started. I'm curious if there is anyone else here with the same car as myself and if there is a complete Noob write up for how to get started with my car? If not, maybe a couple different write up? lol I'll order whatever cable is recommended for my car. Thanks guys!
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277
« Reply #1 on: January 16, 2019, 07:04:33 AM »
Get an FT232 based cable or an MPPS, read file, read s4wiki etc.
Logged
Hindra
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #2 on: January 16, 2019, 08:12:23 AM »
Quote from: Blazius on January 16, 2019, 07:04:33 AM
Get an FT232 based cable or an MPPS, read file, read s4wiki etc.

Thank you gor the response! I did start reading the noob tutorials after posting this. I found a recommended cable on Ebay and ordered that. I did start reading s4wiki. I've done work with my 944 turbo and 95 BMW 530i in tunerpro but all that was a while ago. I need to freshen up and familiarize myself with this ECU. Both of those were chips so flashing the ecu is new to me. I do have a question, am I able to find a similar ECU flash it with the read from my ecu and itll work in my car? If that's the case I'd like to pull a 2nd ecu to use for flashing and keep my factory ecu as backup.
Logged
Hindra
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #3 on: January 16, 2019, 09:04:47 AM »
Also good news. My buddy has a passat. We are going to buy the RossTech cable.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #4 on: January 16, 2019, 09:37:03 AM »
Quote from: Hindra on January 16, 2019, 08:12:23 AM
I do have a question, am I able to find a similar ECU flash it with the read from my ecu and itll work in my car? If that's the case I'd like to pull a 2nd ecu to use for flashing and keep my factory ecu as backup.
Yes.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1277
« Reply #5 on: January 16, 2019, 11:33:44 AM »
^ That is actually recommended, if you wanna crossflash similar flashes AFAIK there is no real telling if it works until you do it Smiley
Logged
Hindra
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #6 on: January 16, 2019, 02:36:11 PM »
Thank you guys for the replies. Cables and extra DME are on the way from Ebay. Now I'm just hoping I can find a definition file ha!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 27, 2024, 08:49:05 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)