Pages: [1]
Author Topic: 8LO 920 932 N eeprom to 8LO 920 932 B  (Read 3453 times)
dreconx
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« on: January 21, 2019, 11:55:35 AM »

Hello,

i have a 8LO 920 932 N cluster in my s3 8l BAM.
now i got a 8LO 920 932 B cluster to put my colormfa on.
i tried to write the 8LO 920 932 N eeprom to my 8LO 920 932 B cluster...
now the gauges dont work and i get no times/ date/ milage...
is there a way to fix this?
mind knowing that i accedentily deteled the 8LO 920 932 B orginal eeprom :/
i hope you guys can give me some tips.

thanks
kind regards
Dreconx
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #1 on: January 21, 2019, 12:02:11 PM »

Upload the 932N dump

ok i found one im my collection - it's a MY2002 and up cluster ( "crypto one " )

The 932B is a MY2001 cluster so the dumps arent interchangebale ,luckily the 932B is easy to recover - just write the dump 932B

if you would have done the other way then it would more complicated to rescue Wink
« Last Edit: January 21, 2019, 12:11:57 PM by macxxx » Logged
dreconx
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« Reply #2 on: January 21, 2019, 12:31:20 PM »

thank you so much <3

you saved my ass this week  Cheesy


Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #3 on: January 25, 2019, 01:36:45 AM »

Did it work?
Logged
Black_A4
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 51


« Reply #4 on: January 25, 2019, 04:38:28 AM »

Hi which tool are you using to write the eeprom on those clusters?
Logged
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #5 on: January 25, 2019, 04:50:27 AM »

I use vag eeprom programeer 1.19
Logged
dreconx
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« Reply #6 on: January 26, 2019, 02:51:32 PM »

Havent yet tried but i would not think for a reason why it would not work
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)