Pages: [1]
Author Topic: Your best tool for reading/flashing me17?  (Read 4476 times)
Freddwood
Jr. Member
**

Karma: +0/-9
Offline Offline

Posts: 34


« on: February 02, 2019, 12:32:31 PM »

What do you guys use to read&flash the Me17? Heard that CMD Flash is probably one of the best but it´s quite expensive for an"hobby-tuner".
Thought about getting KESS but I´m not quite sure. Basically I just wanna hop into tuning my girlfriends MK7 Golf after learning on the Me7.
Greetings!

Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: February 02, 2019, 03:07:31 PM »

MK7 Golf is ME17?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #2 on: February 03, 2019, 12:44:00 AM »

What do you guys use to read&flash the Me17? Heard that CMD Flash is probably one of the best but it´s quite expensive for an"hobby-tuner".
Thought about getting KESS but I´m not quite sure. Basically I just wanna hop into tuning my girlfriends MK7 Golf after learning on the Me7.
Greetings!


Lol good luck
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
pocoloco
Newbie
*

Karma: +0/-7
Offline Offline

Posts: 21


« Reply #3 on: February 04, 2019, 03:34:11 AM »

pretty optimistic jumping from nothing over me7 to med17/ simons in a couple of days...........
Logged
Freddwood
Jr. Member
**

Karma: +0/-9
Offline Offline

Posts: 34


« Reply #4 on: February 05, 2019, 01:23:18 PM »

Well couple of days  is not true. Started two years ago with my S4. Now slowly trying to learn more about MED17.
Logged
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109


« Reply #5 on: February 08, 2019, 12:06:47 AM »

I maked ecu on table for my friend. Audi 4.0tfsi.
Logged
NBR
Full Member
***

Karma: +20/-7
Offline Offline

Posts: 79


« Reply #6 on: February 11, 2019, 11:21:15 PM »

Maybe have a look at PCM Flash. They have a separate modules, so if you only need MED17 it's not too expensive. Make sure that your ECU is MED17 though, MK7 is mostly Simos
Logged
mister t
Sr. Member
****

Karma: +74/-18
Offline Offline

Posts: 343


« Reply #7 on: February 12, 2019, 01:27:19 AM »

Maybe have a look at PCM Flash. They have a separate modules, so if you only need MED17 it's not too expensive. Make sure that your ECU is MED17 though, MK7 is mostly Simos

For legit tools, PCMflash for sure.....
Logged
Freddwood
Jr. Member
**

Karma: +0/-9
Offline Offline

Posts: 34


« Reply #8 on: February 18, 2019, 08:09:40 AM »

Thanks for all the input. Will look into it!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.055 seconds with 18 queries. (Pretty URLs adds 0s, 0q)