Pages: [1]
Author Topic: Audi 2.7T o2 rear sensors romove - 4Z7907551N ESKONF location and values  (Read 4286 times)
rpd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8



Hi!

I want to remove rear o2 sensors in my 2.7T 250KM BES with 4Z7907551N ECU.

I have already changed the values for:
CDKAT = 0
CWDLSAHK = 0
CDHSH = 0
CDHSHE = 0
CDLATV = 0
CDLASH = 0
CDLSH = 0
CDLSHV = 0
CLRHK = 5
CWKONLS = 17

Now, I have problem with location of the ESKONF, becouse XDF for 4Z7907551R has no value defined for ESKONF. In instruction available on S4wiki these are values "13 bytes starting at 0x10C75". I compared my values to the others bins form 2.7T and that's can not be there. I suspect that these can be values from 0x10C86, am I right? If yes, what i need to change to disable circuit diagnostics?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Online Online

Posts: 12232


WWW
« Reply #1 on: February 21, 2019, 02:36:51 PM »

For rear O2 sensors, ESKONF only needs to be changed to report to OBDII that they are not supported

They do not affect anything else.

I have not checked the binary you posted, but if the bytes are all 1:1 identical, especially the surrounding bytes, the odds are good you have the right location.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
rpd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #2 on: February 22, 2019, 08:06:15 AM »

I changed the values. In the attachment you can see the changes

               From        To
0x10C86: 00            C0
0x10C87: F0            CF

Is it okay or did I do something wrong?

I have Tiptronic, not manual gearbox. 
Logged
SQT
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 57


Respectfully SQT ;)



I changed the values. In the attachment you can see the changes

               From        To
0x10C86: 00            C0
0x10C87: F0            CF

Is it okay or did I do something wrong?

I have Tiptronic, not manual gearbox. 
You checked it, I also searched for an address, found several options 0x10C86 or 0x10C93
Logged

a6 2.7
sorry for my English
rpd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8



Okay, I found ESKONF, but I still have doubts about changes in values.

CDHSH
CDHSHE
CDKAT
CDLASH
CDLATV
CDLSH
CWKONLS
CLAHSH2
CLAHSHE2
ESKONF

Are these all parameters to be changed or something omitted?
Logged
pukacinio
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« Reply #5 on: November 16, 2020, 03:08:27 PM »

Okay, I found ESKONF, but I still have doubts about changes in values.

CDHSH
CDHSHE
CDKAT
CDLASH
CDLATV
CDLSH
CWKONLS
CLAHSH2
CLAHSHE2




Are these all parameters to be changed or something omitted?



Can you tell where you find it ? I have the same problem.
Logged
bikemaker
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #6 on: January 21, 2021, 12:51:40 PM »

I changed the values. In the attachment you can see the changes

               From        To
0x10C86: 00            C0
0x10C87: F0            CF

Is it okay or did I do something wrong?

I have Tiptronic, not manual gearbox. 

Yes I agree ESKONF begins at 0x10C86 for the 4Z7907551R and 4Z7907551N binaries. But the locations you want to change are 5 and 6 of 13 byte string and you are trying to change bytes 0 and 1. Review the Wiki thread again. So your string should look more like this 00 F0 B3 FC CC F3 FC FF AA FA FF FF FF  instead of 00 F0 B3 FC CC 33 F0 FF AA FA FF FF FF. I might have found this thread earlier if the search function worked. LOL Note my string is slightly different than yours but I have a BEL and your engine is a BES.


Logged
janovski
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1



Are you sure about the location of ESKONF in the R an N binaries? It is confusing that Byte 4 Bit pair 0 should be EV5 but has a content of 11 in it. So this would mean fuel injector 5 is not installed?!
I would expect the fuel injectors locations all have 00 printed for "installed".
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)