Pages: 1 [2]
Author Topic: KFMDBGRG map  (Read 7254 times)
Leonhard
Full Member
***

Karma: +27/-2
Offline Offline

Posts: 112


« Reply #15 on: September 17, 2020, 05:49:32 AM »

OK, according to FR it would activate signal from AutomaticTransmission

Def CWMDBGRG for version MDBGRG 4.120.0

bit 0 -> limitation from AT
bit 1 -> limitation from mibgrg_w "fast track"
bit 2 -> switch to external Tmot signal
bit 3 -> switch to break signal
bit 4 -> switch to Tmot signal from dashboard

but...I'm always open to learn  Smiley
Logged
timus
Jr. Member
**

Karma: +6/-0
Offline Offline

Posts: 35

Polo 86c2f 1.8T AUM


« Reply #16 on: September 17, 2020, 05:55:17 AM »

Yes, polo needs it otherwise its hard not to make tires slip on first and second gear.

Try to log these variables I post earlier and we then can search deeper what is wrong.
Logged
Leonhard
Full Member
***

Karma: +27/-2
Offline Offline

Posts: 112


« Reply #17 on: September 18, 2020, 12:15:06 AM »

while looking at the 032DR file (360272), the version without CWMDBGRG,
has a additional, simple map for limitation based on gear:
MDBGRGA 8x1 located at 81F528, right behind KFMDBGRG.
It's a limitation using the "slower" cylinder charge path.
@Timus, can you confirm this
Logged
timus
Jr. Member
**

Karma: +6/-0
Offline Offline

Posts: 35

Polo 86c2f 1.8T AUM


« Reply #18 on: September 18, 2020, 01:18:44 AM »

Yes, 032dr has both MDBGRGA and KFMDBGRG, MDBGRGA is single value per gear. KFMDBGRG gives finer control over rpm ranges.
Logged
Leonhard
Full Member
***

Karma: +27/-2
Offline Offline

Posts: 112


« Reply #19 on: September 18, 2020, 05:12:35 AM »

Finally the KFMDBGRG works well, wrong address for TMMIBGR and VMIBGR  Roll Eyes, thanks rogerius
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.034 seconds with 16 queries. (Pretty URLs adds 0s, 0q)