Pages: 1 [2]
Author Topic: EA888 Gen3 SIMOS 18.1 Enhanced Port Injection Capabilities  (Read 671 times)
reycket
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #15 on: March 14, 2019, 02:40:24 PM »

The car runs at E85. The single works well for the injector calibration. Tomorrow I ride to confirm and watch the Stft and Ltft. I think I have about 400 and 420CV soon pass on Rotronic
Logged
reycket
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #16 on: March 16, 2019, 06:30:52 AM »

Hello, I have found to calibrate the injos. against the turbo is dead he does not like pressure 2.9bar .... so if you want some help to calibrate injo I am ok. is not to exceed 2.8 bar of impeccable turbo pressure above it has to break.
Logged
IamwhoIam
Hero Member
*****

Karma: +19/-24
Offline Offline

Posts: 596


« Reply #17 on: March 16, 2019, 07:25:43 AM »

LOL
Logged

I have no logs because I have a boost gauge (makes things easier)
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)