Pages: [1]
Author Topic: Bosch 5.9.2 ecu how to read skf and preferably how to disable immo entirely  (Read 4145 times)
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



The vehicle is a 01 vw cabrio. My wife lost her transponder key. We have a key with no transponder that turns the car on for 1 second. Ive got a kkl 409.1 cable and I do have the ability and deaire to remove the ecu if necessary. Willing to try any option except give vw money. Located in san antonio.
Logged
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



Whoops. Typo in the title. Meant how to read skc.
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654




The only way to immo off this ecu is lift the Eeprom chip and dump with a chip burner, edit and reburn / resolder. You can't do it wit a cheap clone vag cable. It's a flea chip 24c02. Good luck 
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



Dang. Well is it possible to do the operation without desoldering but with using a 8 pin test clip? Any recommendations for an inexpensive chip reader/flasher? Otherwise any recommendations for a us based electrical genius who wont bend me over to get this done??

Thanks I really appreciate your response.
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654




Dang. Well is it possible to do the operation without desoldering but with using a 8 pin test clip? Any recommendations for an inexpensive chip reader/flasher? Otherwise any recommendations for a us based electrical genius who wont bend me over to get this done??

Thanks I really appreciate your response.
It won't work  Because it's in circuit. You need you lift it.
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



Again thank you for the reply. Thats likely above my skill level im afraid of toasting the ecu by soldering incompetently. Can I swap the immo module 6x0953257 with a different one that I buy with known good keys? Or would anyone delete immo if I ship them my module and pay??
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654




Again thank you for the reply. Thats likely above my skill level im afraid of toasting the ecu by soldering incompetently. Can I swap the immo module 6x0953257 with a different one that I buy with known good keys? Or would anyone delete immo if I ship them my module and pay??
I believe I have another m5.92 ecu I'll check when I get home if so I can immo off it for you and ship. The cabby has the aba with the dizzy still right?
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



Yes its got the aba and the dizzy its a manual trans
Logged
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



vagcom says
037906018c
Component 2.0l r4/2v motr hs v02
Soft coding 00001
Shop # wsc 00066


And for immobilizer
6x0953257
Component immo 0007
Soft coding 00001
Shop # wsc 25072
Extra : xxxxxxxxxxxxxxxxx vwz1z0y07189459
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796



I have test some M592 ECUs that it E2P can be read but not write ICSP. M38x nope at all. Best bet is to take  it out board for proper operation. 
« Last Edit: March 23, 2019, 07:00:42 PM by eliotroyano » Logged
Chz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9



So elio I did some googling to better understand you I didnt understand the acronyms. Do you mean incircuit I could read eeprom data but I can not flash it? Would that mean I could retrieve my skc incircuit?
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796



So elio I did some googling to better understand you I didnt understand the acronyms. Do you mean incircuit I could read eeprom data but I can not flash it? Would that mean I could retrieve my skc incircuit?

Yes but just to clarify I have been lucky with some ECUs. Others no. 
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0s, 0q)