Pages: [1]
Author Topic: Finding - KFLDRQ2 - 06A906032MJ  (Read 3089 times)
Maxohio
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 83


« on: April 04, 2019, 12:24:43 PM »

Finding - KFLDRQ2 - 06A906032MJ

Hello Nefmoto, does someone know the adress for KFLDRQ2?
Thanks!
Logged
rogerius
Full Member
***

Karma: +62/-6
Offline Offline

Posts: 116


« Reply #1 on: April 04, 2019, 01:11:06 PM »

Finding - KFLDRQ2 - 06A906032MJ

Hello Nefmoto, does someone know the adress for KFLDRQ2?
Thanks!
try 0x1EBB6
Logged
Maxohio
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 83


« Reply #2 on: April 04, 2019, 11:50:02 PM »

Cool, looks like these are the right value's
What adres should i put in Y and X axis?
Logged
rogerius
Full Member
***

Karma: +62/-6
Offline Offline

Posts: 116


« Reply #3 on: April 05, 2019, 01:17:18 AM »

Cool, looks like these are the right value's
What adres should i put in Y and X axis?
try these
Y: 0x10070
X: 100BC
Logged
Maxohio
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 83


« Reply #4 on: April 06, 2019, 01:11:43 AM »

Thanks, are those value's correct?
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #5 on: April 06, 2019, 03:44:47 PM »

This is correct. Just looks like your axis is a bit off.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #6 on: April 07, 2019, 03:29:06 AM »

^ that. Usually with axis's they tend to rise in increments, so if you see rising numbers then a small one or a big drop, you know you need to adjust your start adress back one, then check again. Also vice versa if first number is small , then there is a big jump but after that increases gradually then you should try to adjust your start adress forward one.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)