Pages: 1 [2]
Author Topic: Theoretical Calculations for Bosch EV14 52LB Injectors (0280158117)  (Read 24156 times)
PovGRide742
Jr. Member
**

Karma: +4/-1
Offline Offline

Posts: 33


« Reply #15 on: February 13, 2012, 02:26:27 PM »

TEMIN is almost never used so don't sweat it. The only use for the variable is to institute minimum injection time when injector is active. It's purpose might be to inject fuel at the threshold of maf accuracy at very light loads (sub idle) to prevent misfiring at the expense of going silly rich in that are... but... I can't imagine when would that value ever be used on stock injectors which need to squirt 3x as long even at idle - I have no idea why it is even in the programming.

Even at the lightest load when decelerating (just before going VE - no injection at all) I still register more than 0.5ms injection time on my 1000cc very rarely touching 0.5ms. And if I do, the car is going VE immediately.



So I started from scratch for nothing... fantastic, lol. Thanks for the explanation though!

EPL and the mainstream tuning industry generally frown on DIY tuning and will likely blacklist you if they find out you have been tinkering.
Even if I have them start from scratch?! Ridiculous...
Logged
guzzi5
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #16 on: April 16, 2019, 11:45:23 AM »

Hi.

Resurrection of a old thread.

Can anyone please help. I have the Bosch 550cc EV14 52LB Injectors (0280158117). I am looking for dead time date on these for fuel at 3bar.

I have looked at the documents that were attached on this thread but i don't know how to multiply from there test results?
Logged
Aardschok
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 64


« Reply #17 on: April 16, 2019, 04:23:46 PM »

http://nefariousmotorsports.com/forum/index.php?topic=320.msg27838.msg#27838

(Reply 88)
« Last Edit: April 16, 2019, 10:18:56 PM by Aardschok » Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 18 queries. (Pretty URLs adds 0s, 0q)