Pages: [1]
Author Topic: Load axis for KFMIOP and KFZOP /2  (Read 2064 times)
mutzicu
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 66


« on: April 22, 2019, 05:08:45 AM »

Hi,

Do the KFMIOP, KFZOP and KFZOP2 share the same hex address for the load table data?

Thanks,
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1415



« Reply #1 on: April 22, 2019, 05:55:56 AM »

http://nefariousmotorsports.com/forum/index.php?topic=3765.0
Maybe  Roll Eyes

And please use this topic for short questions like this
http://nefariousmotorsports.com/forum/index.php?topic=15905.msg124199#msg124199
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #2 on: April 22, 2019, 08:14:24 AM »

Hi,

Do the KFMIOP, KFZOP and KFZOP2 share the same hex address for the load table data?

Thanks,

Yes. If you modify the KFMIOP axis, you should adjust KFZOP and KFZOP2 accordingly.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)